MAX481E/MAX483E/MAX485E/ MAX487E–MAX491E/MAX1487E
±15kV ESD-Protected, Slew-Rate-Limited,Low-Power, RS-485/RS-422 TransceiversABSOLUTE MAXIMUM RATINGS
Supply Voltage (VCC).............................................................12V
–—–
Control Input Voltage (RE, DE)...................-0.5V to (VCC+ 0.5V)Driver Input Voltage (DI).............................-0.5V to (VCC+ 0.5V)Driver Output Voltage (Y, Z; A, B)..........................-8V to +12.5VReceiver Input Voltage (A, B).................................-8V to +12.5VReceiver Output Voltage (RO)....................-0.5V to (VCC+ 0.5V)Continuous Power Dissipation (TA= +70°C)
8-Pin Plastic DIP (derate 9.09mW/°C above +70°C)....727mW
14-Pin Plastic DIP (derate 10.00mW/°C above +70°C)..800mW8-Pin SO (derate 5.88mW/°C above +70°C).................471mW14-Pin SO (derate 8.33mW/°C above +70°C)...............667mWOperating Temperature Ranges
MAX4_ _C_ _/MAX1487EC_ A.............................0°C to +70°CMAX4__E_ _/MAX1487EE_ A...........................-40°C to +85°CStorage Temperature Range.............................-65°C to +160°CLead Temperature (soldering, 10sec).............................+300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functionaloperation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure toabsolute maximum rating conditions for extended periods may affect device reliability.DC ELECTRICAL CHARACTERISTICS
(VCC= 5V ±5%, TA= TMINto TMAX, unless otherwise noted.) (Notes 1, 2)
PARAMETER
Differential Driver Output (no load)Differential Driver Output(with load)
Change in Magnitude of DriverDifferential Output Voltage forComplementary Output StatesDriver Common-Mode OutputVoltage
Change in Magnitude of DriverCommon-Mode Output Voltagefor Complementary Output StatesInput High VoltageInput Low VoltageInput Current
SYMBOLVOD1VOD2ΔVODVOCΔVODVIHVILIIN1
R = 50Ω(RS-422)
R = 27Ω(RS-485), Figure 8R = 27Ωor 50Ω, Figure 8R = 27Ωor 50Ω, Figure 8R = 27Ωor 50Ω, Figure 8–—–DE, DI, RE
–—–DE, DI, RE
–—–DE, DI, RE
DE = 0V;
VCC= 0V or 5.25V,all devices exceptMAX487E/MAX1487EMAX487E/MAX1487E,
DE = 0V, VCC= 0V or 5.25V
Receiver Differential ThresholdVoltage
Receiver Input HysteresisReceiver Output High VoltageReceiver Output Low VoltageThree-State (high impedance)Output Current at Receiver
VTHΔVTHVOHVOLIOZR
-7V≤VCM≤12VVCM= 0V
IO= -4mA, VID= 200mVIO= 4mA, VID= -200mV0.4V≤VO≤2.4V
-7V≤VCM≤12V, all devices exceptMAX487E/MAX1487E
-7V≤VCM≤12V, MAX487E/MAX1487E
12483.5
0.4±1
VIN= 12VVIN= -7VVIN= 12VVIN= -7V
-0.2
70
2.0
0.8±21.0
mA
-0.80.25-0.20.2
mAVmVVVμAkΩkΩ
21.5
50.230.2
CONDITIONS
MIN
TYP
MAX5
UNITSVVVVVVVμA
Input Current(A, B)
IIN2
Receiver Input ResistanceRIN
2
MAX481E/MAX483E/MAX485E/ MAX487E–MAX491E/MAX1487E
±15kV ESD-Protected, Slew-Rate-Limited,Low-Power, RS-485/RS-422 TransceiversDC ELECTRICAL CHARACTERISTICS (continued)
(VCC= 5V ±5%, TA= TMINto TMAX, unless otherwise noted.) (Notes 1, 2)
PARAMETERSYMBOLCONDITIONSMAX488E/MAX489E,–—–DE, DI, RE= 0V or VCCMAX490E/MAX491E,–—–DE, DI, RE= 0V or VCCNo-Load Supply Current(Note 3)ICCMAX481E/MAX485E,–—–RE= 0V or VCCMAX1487E,–—–RE= 0V or VCCMAX483E/MAX487E,–—–RE= 0V or VCCSupply Current in Shutdown Driver Short-Circuit Current,VO= HighDriver Short-Circuit Current,VO= LowReceiver Short-Circuit CurrentESD ProtectionISHDNIOSD1IOSD2IOSRDE = VCCDE = 0VDE = VCCDE = 0VDE = VCCMAX483EMAX487EMINTYP1203005003003002303502501200.535357±15MAX2505009005005004006504002501025025095μAUNITSDE = 0V–—–MAX481E/483E/487E, DE = 0V, RE= VCC-7V≤VO≤12V (Note 4)-7V≤VO≤12V (Note 4)0V≤VO≤VCCA, B, Y and Z pins, tested using Human Body ModelμAmAmAmAkVSWITCHING CHARACTERISTICS—MAX481E/MAX485E, MAX490E/MAX491E, MAX1487E
(VCC= 5V ±5%, TA= TMINto TMAX, unless otherwise noted.) (Notes 1, 2)PARAMETERSYMBOLCONDITIONSDriver Input to OutputDriver Output Skew to OutputDriver Rise or Fall TimeDriver Enable to Output HighDriver Enable to Output LowDriver Disable Time from LowDriver Disable Time from HighReceiver Input to OutputtPLHtPHLtSKEWtR, tFtZHtZLtLZtHZFigures 10 and 12, RDIFF= 54Ω,CL1= CL2= 100pFFigures 10 and 12, RDIFF= 54Ω, CL1= CL2= 100pFFigures 10 and 12,MAX481E, MAX485E, MAX1487ERDIFF= 54Ω,CL1= CL2= 100pFMAX490EC/E, MAX491EC/EFigures 11 and 13, CL= 100pF, S2 closedFigures 11 and 13, CL= 100pF, S1 closedFigures 11 and 13, CL= 15pF, S1 closedFigures 11 and 13, CL= 15pF, S2 closed202035MIN1010TYP4040520204545454560605202020202.55020050505050600MAX60601040ns2570707070200ns150nsnsnsnsnsMbpsnsnsnsnsnsUNITSnsnsFigures 10 and 14,MAX481E, MAX485E, MAX1487EtPLH, tPHLRDIFF= 54Ω,CL1= CL2= 100pFMAX490EC/E, MAX491EC/EtSKDtZLtZHtLZtHZfMAXtSHDNMAX481E (Note 5)Figures 10 and 14, RDIFF= 54Ω,CL1= CL2= 100pFFigures 9 and 15, CRL= 15pF, S1 closedFigures 9 and 15, CRL= 15pF, S2 closedFigures 9 and 15, CRL= 15pF, S1 closedFigures 9 and 15, CRL= 15pF, S2 closed|tPLH- tPHL|DifferentialReceiver SkewReceiver Enable to Output LowReceiver Enable to Output HighReceiver Disable Time from LowReceiver Disable Time from HighMaximum Data RateTime to Shutdown3
MEMORY存储芯片MAX487EESA中文规格书 - 图文
