UG后处理变量

UG后处理变量

global mom_seqnum global mom_part_name global mom_logname global mom_date

global mom_spindle_speed

global mom_output_file_basename MOM_set_seq_off set mom_seqnum 100

# MOM_output_literal \ : $mom_part_name ############)\# MOM_output_literal \ : $mom_logname)\# MOM_output_literal \

# MOM_output_literal \# MOM_suppress always N MOM_output_literal \ MOM_output_literal \ MOM_output_literal \

MOM_output_literal \# MOM_suppress off N

MOM_output_literal \ MOM_output_literal \

# MOM_output_literal \# MOM_set_seq_on global max_z min_z

set zmax [string trimright [format %.4f $max_z] 0] set zmin [string trimright [format %.4f $min_z] 0]

MOM_output_literal \ global mom_machine_time

MOM_output_literal \ \

Tool_Name:$mom_tool_name Tool_No:$mom_tool_number $mom_operation_type

global max_z min_z

set zmax [string trimright [format %.4f $max_z] 0] set zmin [string trimright [format %.4f $min_z] 0]

MOM_output_literal \ global mom_machine_time

MOM_output_literal \ \

global toolnum global toolinfo

global mom_group_name global mom_tool_name global mom_tool_diameter

global mom_tool_corner1_radius global mom_stepover_percent global mom_stock_part global mom_stock_floor

global mom_cut_level_max_depth global mom_cut_level_min_depth global max_z global min_z global max_x global min_x global max_y global min_y

global mom_operation_name global mom_machine_time global mom_tool_flute_length global mom_date

global mom_part_name global mom_logname global mom_cutting_time global pre_tool_name global pre_machine_time global pre_time

global mom_spindle_rpm global mom_feed_cut_value global alex_depth global alex_stepover global tol

global mom_tool_number mom_next_tool_number global mom_coolant_status mom_coolant_mode global mom_spindle_rpm global mom_warning_info global anchor_flag global coolant_flag global first_tool

global mom_tool_name global mom_tool_diameter

global mom_tool_length_adjust_register

global mom_tool_corner1_radius global mom_tool_flute_length

global mom_work_coordinate_number global msys mom_stock_part global mom_stock_floor

global mom_inside_outside_tolerances

global mom_global_cut_depth global mom_stepover_distance

global mom_global_cut_depth global mom_stepover_distance global mom_stepover_scallop

global mom_stepover_variable_passes global mom_stepover_percent global mom_stepover_type global mom_depth_of_cut_type global mom_cut_level_max_depth global mom_depth_per_cut

后处理加速度详解 1. 找到后处理TCL文件用写字板打开 2. 找到proc PB_start_of_program

此处加入：PB_CMD_init_turbo

3. 找到proc PB_CMD_kin_before_motion并且在其上面加入如下：

距上一命令空两行

#============================================================= proc PB_CMD_init_turbo { } {

#============================================================= #

# This custom command may only be used with Post Builder 3.2.1 # or later and NX2 or later. #

# Place this custom command with the \# #

# This custom command will activate the turbo process mode for # the 3-axis mill posts. The execution time will be about 5 to # 10 times faster than the normal process. #

# Special Blocks are included in any 3-axis mill post created # by Post Builder v3.2.1 and on. #

# The blocks being output are formatted similar to that of the # Fanuc type of controllers. #

# The following turbo blocks will appear in the Block section # of N/C Data Definitions in Post Builder: #

# linear_move_turbo # circular_move_turbo # rapid_move_turbo

# sequence_number_turbo #

# In Post Builder, you may modify the Word parameters from

# the N/C Data Defitions dialog to configure the output of that # word used within the turbo blocks. You may also modify the Format # parameters. You may not, however, edit the expression in the # words, remove or add words in any turbo block. #

# All rapid motion is output in a single move. Any custom # commands in the linear move, circular move, rapid move and # mom_before_motion event markers will be ignored. #

global mom_kin_machine_type

if {$mom_kin_machine_type == \

uplevel #0 {

set mom_kin_is_turbo_output \ MOM_reload_kinematics } } }

距下一命令空两行