1.4000-0Cr13-X6Cr13化学与机械性能
1德国牌号Germany Number
中国牌号CN Number欧洲牌号EN Number类 别Classification
密 度Density
1.40000Cr13X6Cr13
Ferritic stainless steel铁素体不锈钢
7.7 g/cm 3
EN 10088-2: 2005 Stainless steels. Technical delivery conditions for
sheet/plate and strip of corrosion resisting steels for general purposes不锈钢。通用耐腐蚀钢板和带钢的交货技术条件
标 准Tandard
EN 10088-3: 2005 Stainless steels. Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosionresisting steels for general purposes
不锈钢。通用耐腐蚀钢的半成品、棒材、棒材、线材、型材和光亮产品的交货技术条件EN 10088-1: 2005 Stainless steels. List of stainless steels不锈钢。不锈钢一览表
化学成分
Chemical composition %
标准 Standard:C
Si
EN 10088-2-2005
Mn
Ni
P
SMax0.015
Cr
Cu
Mo
Ti
-
Max 0.08Max 1Max 1/Max 0.0412-14////
机械性能
Mechanical properties
抗拉强度
Rm - Tensile strength (MPa)屈服强度
Rp0.2 - 0.2% proof strength (MPa)最小延伸率
A - Min. elongation at fracture (%)冲击
KV - Impact energy (J)布氏硬度
Brinell hardness (HB):
+A+A+A
400-600220-24019/
+A200
第 1 页，共 2 页
备注 REMARKS ：
1，机械性能 Mechanical properties
ReH: Minimum yield strength 最低屈服强度Rm: Tensile strength 抗拉强度
A: Minimum elongation 最低延伸率J: Notch impact test 缺口冲击试验
2，热处理工艺参数 Heat treatment conditions
+A Soft annealed 软退火
+AC Annealed to achieve spheroidization of the carbides 退火可实现碳化物的球化 +AR As rolled 轧制状态
+AT Solution annealed 固溶退火 +C Cold drawn / hard 冷拔/硬拔 +CR Cold rolled 冷轧
+FP Treated to ferrite-pearlite structure and hardness range 经铁素体-珠光体处理的结构和硬度范围 +I Isothermal annealing 恒温退火 +LC Cold drawn / soft 冷拔/软拔
+M Thermo mechanical rolling 热机械轧制 +N Normalized 标准化
+NT Normalized and tempered 正火及回火
+P Precipitation hardened 沉淀硬化 +PE Peeled 去皮
+QA Air quenched and tempered 空气淬火和回火 +QL Liquid quenched and tempered 液体淬火和回火 +QT Quenched and tempered 淬火加回火
+S Treated to improve shearability 经过处理以提高剪切能力 +SH As rolled and turned 轧制与滚动
+SR Cold drawn and stress relieved 冷拔和压力缓解 +T Tempered 回火
+TH Treated to hardness range 处理硬度范围 +WW Warm worked 温暖的工作 +U Untreated 未处理
（以上仅供参考）
第 2 页，共 2 页
1.4000-0Cr13-X6Cr13 化学与机械性能 - 图文
