GNTESTINGULTRA-SMALL PACKAGE SLIM POLARIZED RELAYGN-RELAYSDue to highly ef?cient magnetic circuit de-sign, leakage ?ux is reduced and changes in electrical characteristics from compo-nents being mounted close-together are minimized. This all means a packaging density higher than ever before.
? Nominal operating power: 140 mW? Outstanding vibration and shock re-sistance.
Functional shock resistance: 750 m/s2 {75G}
Destructive shock resistance: 1,000 m/s2 {100G}
Functional vibration resistance:
10 to 55 Hz (at double amplitude of 3.3 mm .130 inch)
Destructive vibration resistance:
10 to 55 Hz (at double amplitude of 5 mm .197 inch)
FEATURES
10.60±0.3.417±.0125.70±0.3.224±.0129.00±0.3.354±.01210.60±0.3.417±.0125.70±0.3.224±.012Max.10.00.394? Compact slim body saves spaceThanks to the small surface area of 5.7 mm × 10.6 mm .224 inch × .417 inch and low height of 9.0 mm .354 inch, the pack-aging density can be increased to allow for much smaller designs.
? Outstanding surge resistance.
Surge withstand between open contacts: 1,500 V 10×160 μs (FCC part 68)
Surge withstand between contacts and coil: 2,500 V 2×10 μs (Bellcore)
? The use of twin crossbar contacts en-sures high contact reliability.
AgPd contact is used because of its good sul?de resistance. Adopting low-gas molding material. Coil assembly molding technology which avoids generating vola-tile gas from coil.
? Increased packaging density
mm inch
SPECIFICATIONS
Contact
Arrangement
Initial contact resistance, max. (By voltage drop 6 V DC 1A )Contact material
Nominal switching capacity (resistive load)
Max. switching power (resistive load)
Max. switching voltageMax. switching currentMin. switching capacity f1
Nominal operating power
Single side stable1 coil latching
Mechanical (at 180 cpm)
1 A 30 V DC resistiveElectrical
(at 20 cpm)0.3 A 125 V AC
resistive
2 Form C100 m?
Stationary: AgPd+Au clad
Movable: AgPd1 A 30 V DC0.3 A 125 V AC
30 W, 37.5 V A110 V DC, 125 V AC
1 A
10 μA 10 mV DC140mW (1.5 to 12 V DC) 230mW (24 V DC)100mW (1.5 to 12 V DC) 120mW (24 V DC)
5 × 107
105105
Characteristics
Initial insulation resistance*1Min. 1,000M? (at 500V DC)
Between open contacts750 Vrms for 1min.Initial
breakdown Between contact sets1,000 Vrms for 1min.
2voltage*Between contacts and coil1,500 Vrms for 1min.
Between open contacts
1,500 V (FCC Part 68)
Initial surge (10×160 μs)voltageBetween contacts and coil
2,500 V (Bellcore)
(2×10 μs)
Max. 4 ms (Approx. 2 ms)
Operate time [Set time]*3 (at 20°C)
[Max. 4 ms (Approx. 2 ms)]
Release time (without diode) Max. 4 ms (Approx. 1 ms) [Reset time]*3 (at 20°C)[Max. 4 ms (Approx. 2 ms)]Temperature rise*4 (at 20°C)Max. 50°C
Functional*5Min. 750 m/s2{75G]
Shock resistance
Destructive*6Min. 1,000 m/s2{100G]
10 to 55 Hz at double
Functional*7
amplitude of 3.3 mm
Vibration resistance
10 to 55 Hz at double
Destructive
amplitude of 5 mm
Conditions for opera-Ambient –40°C to 85°Ction, transport and temperature f2–40°F to 185°Fstorage*8
(Not freezing and con-Humidity5 to 85% R.H.densing at low tem-perature)
Unit weightApprox. 1 g.035 ozNotes:
f1This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load.
f2The upper limit for the ambient temperature is the maximum temperature that
can satisfy the coil temperature rise. Under the packing condition, allowable temperature range is from –40 to +70°C –40° to +158°F.
Rating
Expected life (min. operations)Remarks:
*Speci?cations will vary with foreign standards certi?cation ratings.*1Measurement at same location as \*2Detection current: 10mA.
*3Nominal voltage applied to the coil, excluding contact bounce time.
*4By resistive method, nominal voltage applied to the coil; contact carrying current: 1 A.
*5Half-wave pulse of sine wave: 6 ms; detection time: 10μs.*6Half-wave pulse of sine wave: 6 ms.*7Detection time: 10μs.
*8Refer to 5. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT (Page 61)
125
GN
TYPICAL APPLICATIONS
? Telephone exchange, transmission equipment
? Communications devices? Measurement devices
? Home appliances, and audio/visual equipment
? Handheld and portable products
ORDERING INFORMATIONEx. AGNContact arrangementOperating function2: 2 Form C0: Single side stable1: 1 coil latching200A1HZCoil voltage (DC)1H: 1.5V03 : 3V4H: 4.5V06 : 6V09 : 9V12 : 12V24 : 24VPacking styleNil: Tube packingZ: Tape and reel packing(piked from 5/6/7/8 pin side)Type of operation0: Standard type(B.B.M.)Terminal shapeNil: Standard PC board terminalA: Surface-mountterminal A typeS: Surface-mountterminal S typeNote: Tape and reel packing symbol “-Z” is not marked on the relay. “X” type tape and reel packing (picked from 1/2/3/4-pin side) is also available. Suffix “X” instead of “Z”.TYPES AND COIL DATA (at 20°C 68°F)
(1) Standard PC board terminal
Part No.
Operating Function
Standard PC board terminalAGN2001HAGN20003AGN2004HAGN20006AGN20009AGN20012AGN20024Part No.
Operating Function
Standard PC board terminalAGN2101HAGN21003AGN2104HAGN21006AGN21009AGN21012AGN21024
Coil Rating, V DC
1.534.5691224Coil Rating, V DC
1.534.5691224
Pick-up volt-age, V DC (max.) (initial)
1.132.253.384.56.75918Set voltage, V DC (max.) (initial)
1.132.253.384.56.75918
Drop-out voltage, V DC (min.) (initial)
0.150.30.450.60.91.22.4Reset voltage, V DC (max.) (initial)
1.132.253.384.56.75918
Nominal operating current, mA (±10%)
93.846.73123.315.511.79.6Nominal operating current, mA (±10%)
66.733.322.216.711.18.35.0
Coil resistance, ? (±10%)
1664.21452575791,0282,504Coil resistance, ? (±10%)
22.590202.53608101,4404,800
Nominal operating power, mW
140140140140140140230Nominal operating power, mW
100100100100100100120
Max. allowable
voltage, V DC
2.254.56.75913.51828.8Max. allowable
voltage, V DC
2.254.56.75913.51836
Single side stable
1 coil latching
1) Standard packing: 50 pcs. in an inner package (tube); 1,000 pcs. in an outer package
2) Speci?ed value of pick-up, drop-out, set and reset voltage is with the condition of square wave coil pulse.
(2) Surface-mount terminal
Part No.
Operating Function
Tube packingAGN200r1HAGN200r03AGN200r4HAGN200r06AGN200r09AGN200r12AGN200r24
Tape and reel packingAGN200r1HZAGN200r03ZAGN200r4HZAGN200r06ZAGN200r09ZAGN200r12ZAGN200r24Z
Pick-up Drop-out
Coil Rating, voltage, voltage, V DCV DC (max.) V DC (min.)
(initial)(initial)
1.51.130.1532.250.34.53.380.4564.50.696.750.91291.224182.4
Nominal
operating current, mA (±10%)
93.846.73123.315.511.79.6
Coil resistance, ? (±10%)1664.21452575791,0282,504
Nominal operating power, mW140140140140140140230
Max. allowable voltage, V DC2.254.56.75913.51828.8
Single side stable
r:For each surface-mounted terminal variation, input the following letter.A type: A, S type: S1) Standard packing: 50 pcs.(tube), 500pcs. (tape and reel)in an inner package; 1,000 pcs. in an outer package2) Speci?ed value of pick-up, drop-out, set and reset voltage is with the condition of square wave coil pulse.
126
GN
Part No.
Operating Function
Tube packingAGN210r1HAGN210r03AGN210r4HAGN210r06AGN210r09AGN210r12AGN210r24
Tape and reel packingAGN210r1HZAGN210r03ZAGN210r4HZAGN210r06ZAGN210r09ZAGN210r12ZAGN210r24Z
Reset
Set voltage,
Coil Rating, voltage,
V DC (max.)
V DCV DC (max.)
(initial)
(initial)
1.51.131.1332.252.254.53.383.3864.54.596.756.751299241818
Nominal
operating current, mA (±10%)
66.733.322.216.711.18.35.0
Coil resistance, ? (±10%)22.590202.53608101,4404,800
Nominal operating power, mW100100100100100100120
Max. allowable voltage, V DC2.254.56.75913.51836
1 coil latching
r:For each surface-mounted terminal variation, input the following letter.A type: A, S type: S1) Standard packing: 50 pcs.(tube), 500pcs. (tape and reel)in an inner package; 1,000 pcs. in an outer package2) Speci?ed value of pick-up, drop-out, set and reset voltage is with the condition of square wave coil pulse.
DIMENSIONS1. PC board terminal10.60±0.3.417±.0125.70±0.3.224±.0123.20.126mm inchPC board pattern7.60.2993.20.126Schematic (Bottom view)Single side stable(Deenergized condition)12341 coil latching(Reset condition)1234(0.50)9.00±0.3(.020).354±.0120.40±0.1.016±.004(1.50)(.059)3.50±0.3.138±.0120.25±0.1.010±.0043.20±0.15.126±.0062.20±0.15.087±.0063.20±0.15.126±.0062.208-0.85 dia..0878-.033 dia87658765Direction indicationDirection indicationTolerance: ±0.1 ±.0042. Surface-mount terminalSuggested mounting padSchematic (Top view)Single side stable(Deenergized condition)87651) A type0.25±0.1.010±.0040.40±0.1.016±.004(1.50)(.059)10.60±0.3.417±.0125.70±0.3.224±.0123.20.1263.10.1223.20±0.15.126±.0062.20.0871 coil latcing(Reset condition)8765(0.50)9.00±0.3(.020).354±.012Max. 10.00.3942.20±0.15.087±.0063.20±0.15.126±.0065.30.2090.80.03112341234Direction indicationDirection indication7.40±0.3.291±.012Tolerance: ±0.1 ±.004Suggested mounting pad1) S type0.25±0.1.010±.0040.40±0.1.016±.004(1.50)(.059)10.60±0.3.417±.0125.70±0.3.224±.0123.20.1262.25.0892.20.0874.45.1750.80.031(0.50)9.00±0.3(.020).354±.012Max. 10.00.3942.20±0.15.087±.0063.20±0.15.126±.0063.20±0.15.126±.0065.70±0.3.224±.012Tolerance: ±0.1 ±.004REFERENCE DATA
1. Max. switching capacity
DC resistive loadAC resistive load2. Life curve
100No. of operations, × 104Switching current, A1.050403020DC 30V resistive load0.310AC 125Vresistive load30100Contact voltage, V
00.20.40.60.81.01.2Switching current, A
127
GN
NOTES
1. Coil operating power
1) As a general rule, only a pure DC pow-er supply should be used for the coil drive.2) To ensure proper operation, the voltage applied to both terminals of the coil should be ±5% (at 20°C 68°F) the rated operating voltage of the coil. Also, be aware that the pick-up and drop-out voltages will ?uctu-ate depending on the ambient tempera-ture and operating conditions.
3) The ripple factor for the voltage applied to the coil should be less than 5%.
4) For set and reset latching relays, the rated operating voltage should be applied to the coil for 10 ms or more.2. Coil connection
When connecting coils, refer to the wiring diagram to prevent mis-operation or mal-function.
3. External magnetic ?eld
Since GN relays are highly sensitive po-larized relays, their characteristics will be affected by a strong external magnetic ?eld. Avoid using the relay under that con-ditions.
4. Cleaning
In automatic cleaning, cleaning with the boiling method is recommended. Avoid ul-trasonic cleaning which subjects the relay to high frequency vibrations. It may cause the contacts to stick.
lt is recommended that a ?uorinated hy-drocarbon or other alcoholic solvent be used.
5. Packing style
1) The relay is packed in a tube with the relay orientation mark on the left side, as shown in the ?gure below.Orientation (indicates PIN No.1)stripe2) Tape and reel packing(A type)
(1)-1 Tape dimensions
mm inchRelay polarity bar(Z type)0.40.0164.00.1572.00.07911.50.4531.75.06924.00±0.3.945±.0121.50+0.1 0dia.059+.004dia 011.10.4372.00dia.079dia10.70±0.2.421±.008GN relays16.00.6308.00.315Tape coming out directionGeneral tolerance ±0.1 mm .004 inch(S type)(1)-2 Tape dimensions Relay polarity bar(Z type)1.50+0.1 0dia2.00.0794.002.0dia.157.079dia1.75.06910.70±0.2.421±.0080.40.016.059+.004dia 011.50.45324.00±0.3.945±.01211.10.437GN relaysTape coming out directionGeneral tolerance ±0.1 mm .004 inch16.00.6306.3.248(2) Dimensions of plastic peelmm inch21±0.8 dia..827±.031 dia.2.0±0.5.079±.020100±1 dia.3.937±.039 dia.370±2 dia.14.567±.079 dia.13±0.2 dia..512±.008 dia.24.4+20.961+.07902.0±0.2.079±.008Stopper (green)Stopper (red)6. Automatic insertionTo maintain the internal function of the relay, the chucking pressure should not exceed the values below.Chucking pressure in the direction A: 4.9 N {500gf} or lessChucking pressure in the direction B: 9.8 N {1 kgf} or lessChucking pressure in the direction C: 9.8 N {1 kgf} or lessACBPlease chuck the portion.Avoid chucking the center of the relay.In addition, excessive chucking pressure to the pinpoint of the relay should be avoided.
For Cautions for Use, see Relay Technical Information (Page 48 to 76).
1289/1/2000,All Rights Reserved, ? Copyright Matsushita Electric Works, Ltd.Go To Online Catalog
AGN规格书
