51单片机蜂鸣器播放音乐代码（生日快乐-两只蝴蝶-祝你平安） 

51单片机蜂鸣器播放音乐代码(生日快乐-两只蝴蝶-祝你平安)

/*生日快乐歌曲*/

#include

#define uint unsigned int #define uchar unsigned char sbit beep = P1^5; uchar

212,190,212,142,159,

212,212,106,126,159,169,190,119,119,126,159,142,159,0}; uchar ,24,

9,3,12,12,12,12,12,9,3,12,12,12,24,0}; //延时

void DelayMS(uint x) { uchar t;

while(x--) for(t=0;t<120;t++); }

code

SONG_LONG[]={9,3,12,12,12,24,9,3,12,12,12

code

SONG_TONE[]={212,212,190,212,159,169,212,

void PlayMusic() {

uint i=0,j,k;

while(SONG_LONG[i]!=0||SONG_TONE[i]!=0) { //播放各个音符，SONG_LONG 为拍子长度 for(j=0;j

beep=~beep;

//SONG_TONE 延时表决定了每个音符的频率 for(k=0;k

DelayMS(10); i++; } }

void main() { beep=0; while(1)

{

PlayMusic(); //播放生日快乐

DelayMS(500); //播放完后暂停一段时间 } }

两只蝴蝶：

#include // 这是 单片机音乐代码生成器 生成的代码 #define uchar unsigned char

sbit beepIO=P1^5; // 输出 为 P1.5 可以修改 成 其它 IO 口 uchar m,n;

uchar code T[49][2]={{0,0},

{0xF8,0x8B},{0xF8,0xF2},{0xF9,0x5B},{0xF9,0xB7},{0xFA,0x14},{0xFA,0x66},{0xFA,0xB9},{0xFB,0x03},{0xFB,0x4A},{0xFB,0x8F},{0xFB,0xCF},{0xFC,0x0B},

{0xFC,0x43},{0xFC,0x78},{0xFC,0xAB},{0xFC,0xDB},{0xFD,0x08},{0xFD,0x33},{0xFD,0x5B},{0xFD,0x81},{0xFD,0xA5},{0xFD,0xC7},{0xFD,0xE7},{0xFE,0x05},

{0xFE,0x21},{0xFE,0x3C},{0xFE,0x55},{0xFE,0x6D},{0xFE,0x84},{0xFE,0x99},{0xFE,0xAD},{0xFE,0xC0},{0xFE,0x02},{0xFE,0xE3},{0xFE,0xF3},{0xFF,0x02},

{0xFF,0x10},{0xFF,0x1D},{0xFF,0x2A},{0xFF,0x36},{0xFF,0x42},{0xFF,0x4C},{0xFF,0x56},{0xFF,0x60},{0xFF,0x69},{0xFF,0x71},{0xFF,0x79},{0xFF,0x81} };

uchar code music[][2]={{0,4},

{23,4},{21,4},{23,16},{23,4},{21,4},{23,4},{21,4},{19,16},{16,4},{19,4},{21,8},{21,4},{23,4},{21,4},{19,4},{16,4},{19,4},{14,24},

{23,4},{21,4},{23,16},{23,4},{21,4},{23,4},{21,4},{19,24},{16,4},{19,4},{21,8},{21,4},{23,4},{21,4},{19,4},{16,4},{19,4},{21,24},

{23,4},{21,4},{23,16},{23,4},{21,4},{23,4},{21,4},{19,16},{16,4},{19,4},{21,8},{21,4},{23,4},{21,4},{19,4},{16,4},{19,4},{14,24},