某纺织公司各工种、各岗位安全操作规程
第一章 裁剪胶布及附件生产操作规程 一、裁剪胶布操作规程: 1(进入岗位前穿戴好工作服后再进行操作
2. 检查操作现场，对操作台周围及裁刀刀槽中的异物进行清理。 3. 操作前检查操作按钮是否灵敏可靠，检查无误后方可进行操作。有障碍必须及时修理。
4. 操作台的气缸固定压板落下时，听专人指挥，查看无误后操作人员方可落下压板，任何人不得将手放于压板下面，避免压伤 5. 裁剪胶布前必须对胶布的编号、厚度、布面外观质量进行初验，符合要求后方可裁剪。
6. 裁剪时要按照工艺要求的宽度、长度进行画线，确定无误后方可裁剪。 7. 裁剪胶布时，要认真、仔细、平稳的按照所画线条进行裁剪，所裁布边要光滑平直。
8. 裁剪胶布后必须对所裁胶布进行检验、修补。气眼、划痕、杂质等需用焊枪修复，吹焊胶膜后刷密封胶。布面胶层过薄处可用涂刷密封胶修复。
9. 操作人员要按照工艺尺寸对胶布进行编号，并在胶布上画好提手、附件位置。在胶布长短幅相交边的长幅布的两端裁去纵向长27cm，横向宽2cm一条。按照生产油罐的编号顺序将胶布整齐码放于胶布车内，不同编号的油罐所用的胶布不得混放。 10. 不够长度的胶布可搭接使用，每个罐不超过两块胶布，并且搭接胶布必须用在短幅。使用搭接胶布的油罐不超过总罐数量的adership: Luo Mingjun, rectification time: before September 25th, insist for a long time) 1, 2, to further improve research, solve thoroughly, not solid, the effect is not obvious. The major issues and enterprises it is a matter of security bureau year development, the vital interests of the problem, determine the research topic, by members of the Party led research. Basic research
to see the truth, to the truth, do not say hello, not pre arranged. After the investigation to submit the research report. 3, insist on grassroots party members take the lead in implementing the line. <. In the construction of work style building long-term mechanism views > and < on the depth of the grassroots, the people, promoting harmony activities notice >, more mines and enterprises, solve the masses of grassroots leaders, mine is not enough. 4, contact a crowd. Combined with the \to contact a people, by
10%。
11. 将检验合格后的胶布转入下道工序。 12. 填写相关记录。 附件生产操作规程:
1. 设专人负责油罐附件的裁剪、制作及热合工作。
2. 按照计划生产的油罐规格的图纸要求尺寸进行裁剪辅料(提手、衬垫)。 3. 按生产油罐计划相应数量制作提手、衬垫，做到储备合理，保证下道工序的使用。
4. 热合提手、衬垫之前必须认真核对胶布上的位置、形状是否与图纸要求相符，确定无误后方可按照工艺要求热合提手、衬垫。 5. 热合完毕，收卷胶布时不得将提手、衬垫折压变形。 6. 收卷好后胶布必须按照有关编号的位置码放整齐，不同编号的油罐的胶布不得混放。
7. 填写相关记录。 第二章 带膜挤出操作规程
1. 开机前要检验电源、设备是否正常，其中包括加热圈是否工作、有无冷却水、有无压缩空气。机器运转时操作工不得离开岗位。 2. 检查模具是否符合工艺要求。设备上不得放、悬挂任何与生产无
adership: Luo Mingjun, rectification time: before September 25th, insist for a long time) tact a crowd. Combined with the \cadres contact farmers\byg harmony activities notice >, more mines and enterprises, solve the masses of grassroots leaders, mine is not enough. 4, conterm mechanism views > and < on the depth of the grassroots, the people, promotin-In the construction of work style building long investigation to submit the research report. 3, insist on grassroots party members take the lead in implementing the line. <. r theby members of the Party led research. Basic research to see the truth, to the truth, do not say hello, not pre arranged. Afte rprises it is a matter of security bureau year
development, the vital interests of the problem, determine the research topic,1, 2, to further improve research, solve thoroughly, not solid, the effect is not obvious. The major issues and ente - 2 -
关的物品。
3. 检查仪器、仪表显示是否准确无误。
4. 做好挤出记录，以备下次开机前查询。每盘膜下机4. 按要求确认所用原材料，并检查原料内有无杂质、异物等，检查料斗有无异物等。
5. 开机各区段温度设定要偏高于正常温度1-2?。
6. 挤出中注意模具出料情况，依观察到的结果做相应的温度调整，不得延误时间过多，以免造成不必要的原料浪费。
7. 随时观察各仪表，及时进行调整。
8. 挤出中执行工艺，保证壁厚均匀，出现偏差做相应的调整，每盘膜下机必须剪下1cm用手抻拉，检查合膜线的强度及有无划痕，及时做出判断并且及时处理。清、换模具时戴防护手套，避免烫伤。 9. 要在带膜两端标明挤出时间、产品规格、操作工姓名等。 10.将挤出好的带膜按指定地点码放整齐。同时要做好下料回收。 11.挤出完毕、停机前，要求料斗内粒料挤空，螺杆内不得存 12.全部挤出结束，应依次关掉加热圈、螺杆、牵引、卷曲及压缩空气。冷却水待停机一段时间，机器彻底冷却后，方可关闭 13. 关掉总电源、总节门。
14. 清模具:每挤出20000米需清模具一次。检查模具各区温度，达到设定值，断开电源，开始清模具，模具要清理干净，清理过程中，用专用工具清理，不得损坏模具。
dership: Luo Mingjun, rectification time: before September 25th, insist for a long time)a s contact farmers\to contact a people, byerprises, solve the masses of grassroots leaders, mine is not enough. 4, contact a crowd. Combined with the \cadred entterm mechanism views > and < on the depth of the grassroots, the people, promoting harmony activities notice >, more mines an-insist on grassroots party members take the lead in implementing the line. <. In the construction of work style building longt. 3, arch to see the truth, to the truth, do not say hello, not pre arranged. After the investigation to submit the research reporvelopment, the vital interests of the problem, determine the research topic, by members of the Party led research. Basic reset is a matter of security bureau year de1, 2, to
further improve research, solve thoroughly, not solid, the effect is not obvious. The major issues and enterprises i - 3 -
第三章 胶布挤出操作规程
1. 开机前做好开机准备工作:检查电源、加热器、各类仪表，冷却水、气管、各机开关节门，挤出机减速箱油位，料斗，过桥、三辊、牵引、卷取转动是否正常。
2. 严格执行工艺要求，并按照现场的实际情况及时调整设备，保证 adership: Luo Mingjun, rectification time: before September 25th, insist for a long time) tact a crowd. Combined with the \cadres contact farmers\byg harmony activities notice >, more mines and enterprises, solve the masses of grassroots leaders, mine is not enough. 4, conterm mechanism views > and < on the depth of the grassroots, the people, promotin-In the construction of work style building long investigation to submit the research report. 3, insist on grassroots party members take the lead in implementing the line. <. r theby members of the Party led research. Basic research to see the truth, to the truth, do not say hello, not pre arranged. Afte rprises it is a matter of security bureau year
development, the vital interests of the problem, determine the research topic,1, 2, to further improve research, solve thoroughly, not solid, the effect is not obvious. The major issues and ente - 4 -
产品质量。 3. 生产:
某纺织公司各工种、各岗位安全操作规程
