氙灯老化试验测试方法与满足标准
点击次数：144 发布时间：2010-4-8 7:00:19
通用
? ? ? ? ?
IEC 68-2-9, Basic Environmental Testing Procedures-Part 2:Guidance for Solar Radiation Testing ISO 4892-1, Plastics-Methods of exposure to laboratory light sources-Part 1: General Guidance
ASTM G151, General Guidelines for Exposure of Nonmetallic Materials
ASTM G155, Xenon-Arc Test Apparatus for Exposure of Nonmetallic Materials
GB/T 16422.1，塑料实验室光源暴露试验方法 第1部分：总则
汽车
SAE J2412, Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Xenon-Arc Apparatus
? SAE J2527, Accelerated Exposure of Automotive Exterior
Materials Using a Controlled Irradiance Xenon-Arc Apparatus ? QB/T 2727，皮革 色牢度试验 耐光色牢度：氙弧
? ASTM D7356, Standard Test Method for Accelerated Acid Etch
Weathering of Automotive Clearcoats Using a Xenon-Arc Exposure Device
?
涂料
?
?
? ? ? ?
ISO 11341, Paints ａnd varnishes - Artificial weathering ａnd exposure to artificial radiation - Exposure to filtered xenon-arc radiation
ASTM D3451, Testing Coating Powders ａnd Powder Coatings ASTM D3794, Testing Coil Coatings ASTM D6577, Standard Guide for Testing Industrial Protective Coatings
ASTM D6695, Xenon-Arc Exposures of Paints ａnd Related Coatings
GB 1865, 色漆和清漆 人工气候老化和人工辐射暴露（滤过的氙
弧辐射）
? JIS K 5600-7-7, Testing Methods for Paints - Part 7:
Long-Period Performance of Film - Section 7: Accelerated Weathering （Exposure to Filtered Xenon Arc）
? MPI: #113, Exterior, Waterborne, Pigmented Elastomeric
Coating
? MS 133: Part F14, Methods of Test for Paints & Varnishes:
Part F14: Artificial Weathering & Exposure to Artificial Radiation – Exposure to Filtered Xenon Arc Radiation （ISO 11341）
医药
?
ICH Guideline, Stability Testing: Photostability Testing of New Drug Substances ａnd Products
塑料
? ? ? ? ? ? ? ? ? ? ?
ISO 4892-2, Plastics-Methods of exposure to laboratory light sources-Part 2: Xenon-arc sources
JIS K 7350-2, Plastics-Methods of exposure to laboratory light sources-Part 2: Xenon-arc sources
DIN EN 513, Unplasticized polyvinylchloride （PVC-U） profiles for fabrication of windows & doors
ASTM D1248 , Polyethylene Plastic Extrusion Materials for Wire ａnd Cable
ASTM D2565 , Xenon-Arc – Plastics for Outdoor Applications ASTM D4101, Polypropylene Plastic Injection ａnd Extrusion Materials
ASTM D4459 , Xenon-Arc – Plastics for Indoor Applications ASTM D5071, Xenon-Arc Exposure of Photodegradable Plastics ASTM D6662, Plastic Lumber Decking Boards
UL 1581, Reference Standard for Electrical Wires, Cables & Flexible Cords
GB/T 16422.2，塑料实验室光源暴露试验方法 第2部分：氙弧灯
土工布
?
ASTM D4355, Deterioration of Geotextiles to UV Light
纺织品
? ? ? ?
?
? ? ? ? ? ?
AATCC TM 16, Colorfastness to Light
AATCC TM 169,Weather Resistance of Textiles: Xenon Lamp Exposure
GB/T-8430, 纺织品 色牢度试验 耐人造气候色牢度：氙弧 IS: 2454, Indian Standard- Method for Determination of Colour Fastness of Textile Materials to Artificial Light （Xenon Lamp） ?
GB/T 8427，纺织品 色牢度试验 耐人造光色牢度：氙弧 GB/T 8431，纺织品 色牢度试验 光致变色的检验和评定 GB/T 8432，耐光色牢度试验仪用湿度控制标样
GB/T 16991，纺织品 色牢度试验 高温耐光色牢度：氙弧 FZ/T 75002，涂层织物 光加速老化试验方法 氙弧法 GB/T-8430, Textiles - Tests for colorfastness - Colorfastness to artificial weathering: Xenon arc fading lamp test ISO 105 B02, Textiles-Tests for colour fastness-Part B02: Colour fastness to artificial light: Xenon arc fading lamp test
印刷油墨/艺术家用材料/纸张
? ? ? ?
? ? ? ?
ISO 11798, Information ａnd documentation – Permanence of writing, printing & copying on paper
ISO 12040, Graphic Technology - Prints ａnd printing inks ISO 18909, Imaging Materials – Processed photographic colour films ａnd paper prints
ASTM D3424, Lightfastness of Printed Matter
ASTM D4303 , Lightfastness of Artists’ Pigments
ASTM D5010, Testing Printing Inks & Related Materials ASTM D6901, Standard Specification for Artists’ Colored Pencils
ASTM F2366, Lightfastness of Ink Jet Prints Exposed to Window Filtered Daylight
屋顶材料
? ? ?
? ? ?
ASTM D4434, Poly Vinyl Chloride Sheet Roofing
ASTM D4637, EPDM Sheet Used in Single-Ply Roof Membrane ASTM D4798, Xenon-Arc – Bituminous Materials
ASTM D4811, Nonvulcanized Rubber Sheet Used as Roof Flashing ASTM D5019, Reinforced Non-Vulcanized Polymeric Sheet
ASTM D6083, Liquid Applied Acrylic Coatings Used in Roofing
橡胶
ISO 3865, Rubber, Vulcanized or Thermoplastic – Methods of test for staining on contact with organic materials
? ISO 4665, Rubber, Vulcanized or Thermoplastic – Resistance
to weathering
? GB/T 12831，硫化橡胶人工气候（氙灯）老化试验方法
?
粘合剂
ASTM D904, Exposure of Adhesive Specimens to Artificial Light
? ASTM C1442, Conducting Tests on Sealants Using Artificial
Weathering Apparatus
? ASTM C1501, Standard Test Method for Color Stability of
Building Construction Sealants
?
密封剂
ASTM C1442, Conducting Tests on Sealants Using Artificial Weathering Apparatus
? ASTM C1501, Color Stability of Sealants
?
包装材料
ASTM D6551, Accelerated Weathering of Pressure-Sensitive Tapes by
Xenon Arc
建筑材料
? GB/T 16259，建筑材料人工气候加速老化试验方法
电工电子产品
GB/T 2423.24，电工电子产品环境试验 第2部分：试验方法 试验Sa：
模拟地面上的太阳辐射
塑料制品的老化试验
点击次数：108 发布时间：2010-6-1 21:40:39
塑料产品的老化试验介绍 1 概述：
所谓人工光源（实验室光源或人工气候）曝露试验方法，是通过模拟和强化大气环境中一些主要致老化因素，而达到人工加速目的的老化试验方法[1]。由于实际生产中对材料耐候性的评估的急切需求，一些人工光源设备被用来加速老化。这些光源都包括：（经过滤的）宽频氙弧灯、荧光紫外灯、金属卤化物灯（metal halide lamps）和开放式碳弧灯；还有一些不经常使用的光源，它们包括：汞蒸气灯、钨灯（tungsten lamp）[4]。我国1997年颁布的国家标准GB/T 16422-1.2.3（等效ISO 4892，1994）中规定了最常用的氙灯、荧光紫外灯、开放式碳弧灯三种光源的曝露试验方法。 2 通则 A 结果的偏差
鉴于材料在真实环境中老化的复杂性（日光辐射的特性和能量随地点、时间而变化，温度，温度的周期变化等），为减少重复曝露试验结果的差异，在特定地点的自然曝露试验应至少连续曝露两年。经验表明，实验室光源与特定地点的自然曝露试验结果之间的相关性，只适用于特定种类和配方的材料和特定的性能，和其相关性已为过去试验所证实了的场合。 B 试验目的
a 通过模拟自然阳光下长期曝露作用的加速试验，以获得材料耐候性的结果。为了得到曝露全过程完整的特性，需测定试样在若干曝露阶段的性能变化。
氙灯老化试验测试方法与满足标准
