..
R1配置情况:
< Huawei > < Huawei > < Huawei >clo
< Huawei >clock d [Huawei]sy [Huawei]sysname R1
Mar 5 2017 18:30:19-08:00 Huawei %IFPDT/4/IF_STATE(l)[0]:Interface GigabitEt hernet0/0/1 has turned into UP state. [Huawei]sysname R1 [R1] [R1] [R1]
Enter system view, return user view with Ctrl+Z. [R1] [R1]su [R1]super p
[R1]super password c
[R1]super password cipher 123456 [R1] [R1]us [R1]user-i
< Huawei >clock datetime 18:30:00 2017-03-05
.. .
..
[R1]user-interface v [R1]user-interface vty 0 4 [R1-ui-vty0-4] [R1-ui-vty0-4]au
[R1-ui-vty0-4]authentication-mode p
[R1-ui-vty0-4]authentication-mode password
Please configure the login password (maximum length 16):123456 [R1-ui-vty0-4] [R1-ui-vty0-4]se [R1-ui-vty0-4]set au
[R1-ui-vty0-4]set authentication p
[R1-ui-vty0-4]set authentication password c
[R1-ui-vty0-4]set authentication password cipher 123456 [R1-ui-vty0-4] [R1-ui-vty0-4]q [R1] [R1] [R1]int
[R1]interface g
[R1]interface GigabitEthernet 0/0/0 [R1-GigabitEthernet0/0/0]
[R1-GigabitEthernet0/0/0]ip add
[R1-GigabitEthernet0/0/0]ip address 192.168.1.254 24 [R1-GigabitEthernet0/0/0]
Mar 5 2017 18:51:37-08:00 R1 %IFNET/4/LINK_STATE(l)[0]:The line protocol IP on the interface GigabitEthernet0/0/0 has entered the UP state. [R1-GigabitEthernet0/0/0] [R1-GigabitEthernet0/0/0]un [R1-GigabitEthernet0/0/0]undo sh [R1-GigabitEthernet0/0/0]undo shutdown
Info: Interface GigabitEthernet0/0/0 is not shutdown. [R1-GigabitEthernet0/0/0]q [R1] [R1]int
[R1]interface g
[R1]interface GigabitEthernet 0/0/1 [R1-GigabitEthernet0/0/1]ip ad [R1-GigabitEthernet0/0/1]
Mar 5 2017 18:53:23-08:00 R1 %IFNET/4/LINK_STATE(l)[1]:The line protocol IP on the interface GigabitEthernet0/0/1 has entered the UP state. [R1-GigabitEthernet0/0/1]un [R1-GigabitEthernet0/0/1]undo sh [R1-GigabitEthernet0/0/1]undo shutdown
[R1-GigabitEthernet0/0/1]ip address 192.168.12.1 24
.. .
..
Info: Interface GigabitEthernet0/0/1 is not shutdown. [R1-GigabitEthernet0/0/1] [R1-GigabitEthernet0/0/1]q [R1] [R1]dis
[R1]display ip int [R1]display ip interface b *down: administratively down ^down: standby (l): loopback (s): spoofing
The number of interface that is UP in Physical is 3 The number of interface that is DOWN in Physical is 1 The number of interface that is UP in Protocol is 3 The number of interface that is DOWN in Protocol is 1
Interface IP Address/Mask Physical Protocol GigabitEthernet0/0/0 192.168.1.254/24 up up GigabitEthernet0/0/1 192.168.12.1/24 up up GigabitEthernet0/0/2 unassigned down down NULL0 unassigned up up(s) [R1] [R1] [R1]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
Enter system view, return user view with Ctrl+Z. [R1] [R1] [R1]ip ro
[R1]ip route- [R1] [R1]ip ro
[R1]ip route-
[R1]display ip interface brief
[R1]ip route-static 192.168.23.0 255.255.255.0 192.168.12.2
[R1]ip route-static 192.168.2.0 255.255.255.0 192.168.23.2
.. .
..
[R1] [R1] [R1]dis
[R1]display ip ro
[R1]display ip routing-table
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------ Routing Tables: Public
Destinations : 12 Routes : 12
Destination/Mask Proto Pre Cost Flags NextHop Interface
127.0.0.0/8 Direct 0 0 D 127.0.0.1 InLoopBack0 127.0.0.1/32 Direct 0 0 D 127.0.0.1 InLoopBack0 127.255.255.255/32 Direct 0 0 D 127.0.0.1 InLoopBack0 192.168.1.0/24 Direct 0 0 D 192.168.1.254 GigabitEthernet 0/0/0
192.168.1.254/32 Direct 0 0 D 127.0.0.1 GigabitEthernet 0/0/0
192.168.1.255/32 Direct 0 0 D 127.0.0.1 GigabitEthernet 0/0/0
192.168.2.0/24 Static 60 0 RD 192.168.23.2 GigabitEthernet 0/0/1
192.168.12.0/24 Direct 0 0 D 192.168.12.1 GigabitEthernet 0/0/1
192.168.12.1/32 Direct 0 0 D 127.0.0.1 GigabitEthernet 0/0/1
192.168.12.255/32 Direct 0 0 D 127.0.0.1 GigabitEthernet 0/0/1
192.168.23.0/24 Static 60 0 RD 192.168.12.2 GigabitEthernet 0/0/1
255.255.255.255/32 Direct 0 0 D 127.0.0.1 InLoopBack0 [R1]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
PING 192.168.2.254: 56 data bytes, press CTRL_C to break
Reply from 192.168.2.254: bytes=56 Sequence=1 ttl=254 time=50 ms Reply from 192.168.2.254: bytes=56 Sequence=2 ttl=254 time=30 ms Reply from 192.168.2.254: bytes=56 Sequence=3 ttl=254 time=50 ms
.. .
..
Reply from 192.168.2.254: bytes=56 Sequence=4 ttl=254 time=30 ms Reply from 192.168.2.254: bytes=56 Sequence=5 ttl=254 time=20 ms
--- 192.168.2.254 ping statistics --- 5 packet(s) transmitted 5 packet(s) received 0.00% packet loss
round-trip min/avg/max = 20/36/50 ms
PING 192.168.2.1: 56 data bytes, press CTRL_C to break Request time out
Reply from 192.168.2.1: bytes=56 Sequence=2 ttl=126 time=40 ms Reply from 192.168.2.1: bytes=56 Sequence=3 ttl=126 time=30 ms Reply from 192.168.2.1: bytes=56 Sequence=4 ttl=126 time=50 ms Reply from 192.168.2.1: bytes=56 Sequence=5 ttl=126 time=40 ms
--- 192.168.2.1 ping statistics --- 5 packet(s) transmitted 4 packet(s) received 20.00% packet loss
round-trip min/avg/max = 30/40/50 ms
The current configuration will be written to the device. Are you sure to continue? (y/n)[n]:y
It will take several minutes to save configuration file, please wait......... Configuration file had been saved successfully
Note: The configuration file will take effect after being activated
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
R2配置如下
.. .
华为静态路由实验练习题
![](/skin/haowen/images/icon_star.png)
![](/skin/haowen/images/icon_star.png)
![](/skin/haowen/images/icon_star.png)
![](/skin/haowen/images/icon_star.png)