Page 1 of 39
TCF-GMS-8940.04
TEST REPORT ISO 20345 / EN ISO 20345 Personal protective equipment - Safety footwear Report Reference No. .................... : TCF-GMS-8940.04 Tested by (+ signature) .......... : Approved by (+ signature) ..... : Kevin Yang ............................................ ............................................ King Hu Date of issue .................................... : November 19, 2018 Shenzhen ZCT Technology Co., Ltd. 3/F, Building 5, Hongsheng Industrial Zone, Bao'an Road, Xixiang Street, Bao'an District, Shenzhen, Guangdong, China Commission Test Muscat Collections & Trading Co,.Limited Rm 633 Aoyuan Building Luoxi Road Pan Yu District Guangzhou China Same as applicant Same as applicant ISO 20345:2011 EN ISO 20345:2011 Commission test N/A EN ISO 20345:2011 ZTS Dated 2013-05 Safety shoes - TLX-100ZJ-S Introduction Construction: Cemented Sole: Phylon / Rubber sole Toecap: Steel Toecap Insole: Metallic Penetration Resistant Inserts Category: S3 SRC Size: 7(41) Testing Laboratory ........................ : Address ............................................ : Testing procedure............................. : Applicant’s name ........................... : Address ............................................ : Manufacturer’s name ..................... : Address ............................................ : Factory’s name ............................... : Address ............................................ : Test specification: Standard ........................................... : Test procedure ................................. : Non-standard test method…………..: Test Report Form No...................... : TRF Originator ................................. : Master TRF ...................................... : Test item description ..................... : Trade Mark ....................................... : Model/Type reference ...................... : Parameter ........................................ : Summary of testing: This test report complies with ISO 20345:2011 Test Report Content This test report consists of: Main report Annex I: Photo Documentation, 1 page(s). Reference:
Page 2 of 39
TCF-GMS-8940.04
Test case verdicts: Test case does not apply to the test object ...: N/A Test object does meet the requirement ........: Test object does not meet the requirement ..: Testing: Pass (P) Fail (F) Date of receipt of test item ............................: November 01, 2018 Date(s) of performance of test ......................: November 01, 2018 to November 22, 2018
Page 3 of 39
TCF-GMS-8940.04
General remarks: The test results presented in this report relate only to the item(s) tested. This report shall not be reproduced, except in full, without the written approval of the testing laboratory. \ \ \ Throughout this report a comma (point) is used as the decimal separator. Safety shoes, TLX-100ZJ-S
Page 4 of 39
TCF-GMS-8940.04
EN ISO 20345 Clause
Requirement – Test Terms and definitions For the purposes of this document, the following terms and definitions apply. Result Verdict - 3 P P - NOTE The component parts of footwear are illustrated in Figures 1 and 2. 3.1 Ssafety footwear footwear incorporating protective features to protect the wearer from injuries that could arise through accidents P NOTE Items of safety footwear are fitted with toecaps designed to give protection against impact when tested at an energy level of at least 200J and against compression when tested at a compression load of at least 15kN. P 3.2 3.2.1 leather hide or skin tanned to be imputrescible leather split flesh or middle part of a hide or skin, obtained by splitting a thick leather, which is tanned to be imputrescible - P - P 3.3 3.4 rubber vulcanized elastomers polymeric materials large molecules composed of repeating structural units (monomers) typically connected by chemical bond - P - P EXAMPLE Polyurethane (PU) or polyvinylchloride (PVC). P - P 3.5 insole non-removable component used to form the base of the shoe to which the upper is usually attached during lasting 3.6 insock removable or non-removable footwear component used to cover part or all of the insole NOTE “Non-removable” means that the insock cannot be removed without being damaged. - P 3.7 lining -
Page 5 of 39
TCF-GMS-8940.04
EN ISO 20345 Clause
Requirement – Test material covering the inner surface of the upper NOTE 1 The wearer's foot is in direct contact with the lining. Result Verdict P P P NOTE 2 Where an upper is split at the forepart to house the toecap, or if an external piece of material is stitched to the upper to form a pocket to house the toecap, the material under the toecap acts as a lining. 3.7.1 3.7.2 vamp lining quarter lining material covering the inner surface of the forepart of the upper - - P P - P - P P - P material covering the inner surface of the quarters of the upper 3.8 3.9 cleat protruding part of the outer surface of the sole rigid outsole sole which cannot be bent through an angle of 45° under a load of 30N NOTE Testing is performed in accordance with ISO 20344:2011, 8.4.1. 3.10 cellular outsole outsole which has a density of 0,9 g/ml or less with a cell structure that is visible under 10magnification 3.11 penetration-resistant insert footwear component placed in the sole complex in order to provide protection against penetration - P - P 3.12 safety toecap built-in footwear component designed to protect the toes of the wearer from impacts of an energy level of at least 200J and compression at a load of at least 15kN 3.13 seat region counter area rear 10% of the total length of the footwear (upper and sole) - P - P 3.14 conductive footwear footwear, the resistance of which is in the range of 0k to 100k
ISO20345报告模板
