中英文对照外文翻译文献
(文档含英文原文和中文翻译)
原文：
Ground Source Heat Pump
At present,energy is the most important element for the development of states’
economy.Because of the good energy-saving effect,using regenerate resource of energy,and no pollution,the GROUND SOURCE HEAT PUMP AIR-CONDITION is used more and more popular now.In the system of the GROUND SOURCE HEAT PUMP AIR-CONDITION,the terminal devices what include the fan,the deep well pump,the circulate pump are the biggest energy-consumed part except the inner device as well as the compressor motor, etc.So it is very important and significant
to make the terminal devices running in the most energy-saving condition.In this paper,the author founded on the GROUND SOURCE HEAT PUMP AIR-CONDITION in Guangxi University,based on the actual project condition, made the redesign through the way of frequency conversion technology for the old system of GROUND SOURCE HEAT PUMP AIR-CONDITION.At first, the equipments’ running control system were improved following the energy-saving principle of fan and pump,choused Mitsubishi FR series frequency transducer with vector-control
function,Mitsubishi FX2N series PLC and other auxiliary parts to make up of the auto-control system for the GROUND SOURCE HEAT PUMP AIR-CONDITION,and then did the emulating analysis for the vector-control mode in the frequency conversion process.In the next based the auto-control system,made the PLC control system designing.This system monitor the temperature and flux in accurate and real time,then input feedback to the plc,finally the terminal device running status will correspond to the customer’s demanded-load,it can well meet the goal for saving energy and prolong the life of the motor and other device.At the same time,designed the PLC control process,according to this transformation of the specific programme,programmed for the PLC by using the FX-GP/WIN-C programme software.Researched and analyses the PID algorithm and its improved algorithm for the PID Operational module in the PLC.At last,through detailed analysis and accounted for energy-saving effect and the cost of the
system-reforming,validated the profitability of this redesigned-project,and showed its feasibility and worth
Be using renewable geothermal energy in shallow ground layer, a ground source heat pump (GSHP) technology is known as one of air conditioning techniques which have the greatest developmental. The GSHP has great potentials in energy reduction and in reducing CO2 emissions to conventional HVAC systems. In China, energy shortage and environmental issues pose a serious challenge accompanied by rapid economic growth. GSHP has been spotlighted as both energy efficiency and environmental benefits. Generally, the initial investment for a GCHP system is higher than that of a conventional system. GCHP energy savings will offset the higher installing cost in future. However, there are many aspects affecting the actual amount of energy
saved, such as climate, building load, ground heat exchanger, heat pump, control, etc. Recently, a lot of research on the energy performance of GCHP has been carried out. However, most of these previous research projects evaluated the performance of GCHP system based on a laboratory scale or a small capacity system. There is little data documenting the long-term performance of a large-sized GCHP. Evalution and research on real world installed GCHP will provide a more accurate understanding of the current technology’s performance.The paper presented that the energy performance evaluation of two types of GSHPs based on actual operational data. The two types of GSHPs were ground-coupled heat pump system (GCHPs) and groundwater heat pump system (GWHPs) which were, respectively, installed in two apartment buildings of Wuhan, China. In one year, we monitored various operating parameters, including the outdoor temperature, the flow rate, electrical consumption, and the water temperature. The coefficient of performance (COP) values of system and chiller were determined based on a series of measurements. During residential GCHP system operation, the heat injection rate into soil is larger than the heat extraction rate out of soil. The COP of chillers of the GCHPs decreased significantly during the heating season due to the lowering of ground soil temperature. The system power consumption exhibited a strong linear relationship with outdoor temperature in both seasons and this suggests that normalizing power consumption against degree-days is a highly practical index in energy analysis in resident buildings, especially in winter.Some research topics were studied on the two actual cases. An exergy analysis of a ground water heat pump system on the actual operation was conduced. The energy efficiency and exergy loss and efficiency in each of the components of the system are detemined for the average measured parameters obtained from the monitored results of the hottest month and the coldest month. Inefficient facts are found out and increased energy efficiencies of two proposed improvement measures were estimated. Lower approach
temperature is effective energy saving. In addition to the energy analysis, a full exergy analysis helps to identify the components where inefficiencies occur. An economic analysis model for GWHP was established to calculate energy consumption and operating cost based on a baseline condition. Plate heat exchanger flow rate and groundwater flow rate were optimization parameters according to different water price of the groundwater:GWHP survey data shows the impact of water price on groundwater flow rate in design. The long-term energy performances of the
GWHPs and the GCHPs were investigated and compared with conventional HVAC systems and other GSHPs on literature data. A performances model was established base on the two cases to constrast the predicted performance with the actual performance.Based on superposition theorem of geothermal heat exchangers (GHE), a inverse model for GHE, G-functions interpolation approach was proposed. Linear interpolation method was adopted to fit G-functions. The method presented here uses the Nelder and Mead simplex algorithm as part of a parameter estimation algorithm to estimate G-function. For verification of G-functions interpolation approach, a numerical experimentation had been conducted where synthetic load on GHE was established. The simulation results with error and no error, were inversely modeled by G-functions interpolation approach and DST calibrated approach. The actual dataset of a small sized and a large sized GSHPs were also used in inverse modeling to verify the results from the G-functions interpolation approach. The small sized GSHPs was from literature. The large sized vertical GSHPs was the monitored case in the paper. A detailed DST model of a GHE has been calibrated to monitored data. The second year predicted temperatures calculated by the two models were compared with the measured. The results show the two approaches are reliable and have good performance of error tolerance. The error of GHE water temperature calculated by G-functions interpolation approach was less than DST calibrated approaches. The data error inversely modeled was mainly from recorded day data. As a extension study of the G-functions interpolation model, degree-day G-functions approach was proposed. The model was based on degree-day prediction load and can be applied on the residential buildings. The standard deviation of GHE water temperature by degree-day G-functions approach was larger than DST calibrated approaches. The result shows the appropriateness of degree-day G-functions interpolation approach for the quantitative modeling of GHE.This paper shows that the research on actual performance according measured data and presents two inverse models:G-functions interpolation model, degree-day G-functions model approach, which provides new methods for GHE inverse modeling
With the sustainable development theory being put forward in recent years, people pay more and more attention to energy efficiency and environmental protection. The Ground Source Heat Pump
(GSHP) air-conditioning system has been a kind of new technology to save energy and protect environment. This paper gives an overview of technology economy analysis on GSHP Air-conditioning System and optimization design of its ground heat exchanger, which provide helpful suggestion to engineers.First, this paper gives an overview of the history of GSHP system in China and foreign countries. Based on the work principle of the GSHP system, the
characteristics of three circulations have been proposed, which are the use of renewable energy saving and environmental friendly, etc. hi terms of technology economy, the GSHP
air-conditioning system was compared with the air source heat pump system, the water source heat pump system and the traditional central air-conditioning system. Main indexes are given to evaluate the technology economy of the GSHP air-conditioning system. A practical project was used as an example for the analysis.Ground-loop heat exchanger is an important part of the GSHP air-conditioning system and deferent from other traditional air-conditioning systems. This paper gave detailed designing method of Ground-loop heat exchanger, including load calculation, pipe layout, choice of tubes and its material, antifreeze method, calculation of pressure drop, etc. Taken the GSHP air-conditioning system in the report room of Shandong Institute of Architecture and Engineering as an example, its design was analyzed and the optimization design of ground-loop heat exchanger was proposed.
The people attention to energy efficiency and environmental protection,which decide the sustainable development of the country.The Ground Source Heat Pump(GSHP)air-conditioning system has been a kind of new technology to save energy and protect environment.This paper gives an overview of technology economy analysis on GSHP Air-condition System and optimization design of its ground heat exchanger,which provide helpful suggestion to engineersFirst,this paper gives an overview of GSHP system in China and foreign countries. Based on the work principle of the GSHP system,the characteristics of three circulations have been proposed,which are the use of renewable energy saving and environmental friendly,etc.In teams of technology ,the GSHP air-conditioning system was compared with the air source heat pump system,the water source heat pump system and the traditional central air-conditioning system.Main indexes are given to evaluate the technology economy of GSHP air-conditoning
建筑环境与设备工程中英文对照外文翻译文献
