AL-100-MSDS-Categories-AtlanticEquipmentEngineers

l

ATLAftTIC IWIPMEHT

■a 十Jinn C.A.S. Number: 7429-90-5

SECTION 1 -CHEMICAL PRODUCT AND COMPANY IDENTIFICATION:

AL-100 Product/Material:

Manufacturer/Distributor: Atlantic Equipment Engineers Address: 13 Foster Street, P.O. Box 181 Telephone/Fax Numbers: Emergency Contact: Chemical Name: Chemical Formula: CAS #: SECTION 2 — HAZARDS IDENTIFICATION: Emergency Overview:

Potential Short Term Health Effects

Eyes:

Inhalation:

Target Organs:

Main Symptoms:

MATERIAL SAFETY DATA SHEET ALUMINUM METAL POWDER

Bergenfield, NJ 07621

(201) 384-5606 / (201) 387-0291

Chemtrec (800) 424-9300

(703) 527-3887 (Outside the USA)

Aluminum powder Al 7429-90-5

Reactive flammable material. Contact with water liberates extremely flammable gases. Prolonged exposure may cause chronic effects. Irritating to respiratory system. This product is not considered to be a carcinogen by IARC, ACGIH, NTP, or OSHA.

Contact may irritate eyes. Irritating to respiratory system. Eyes. Respiratory system. Irritation.

SECTION 3 — HAZARDOUS MATERIALS/INFORMATION ON

INGREDIENTS: Component wt. % CAS # 7429-90-5 98 - 100 Aluminum

Information presented herein is believed to be accurate and reliable but is not intended to meet any specification and does not imply

any guarantee or warranty by Atlantic Equipment Engineers. For more information and assistance, please call (201) 384-5606.

Atla ntic Equipme nt Engin eers, 13 Foster Street, P.O. Box 07621 ?

Page 1

181, Berge nfield, NJ

MATERIAL SAFETY DATA SHEET AL-100

SECTION 4

-FIRST AID MEASURES:

First Aid Procedures

Eye Contact: Skin Contact:

Get medical attention if irritation develops or persists. Immediately flush eyes with plenty of water for at least 15 minutes.

Wash off with warm water and soap. Get medical attention if irritation develops or persists.

Move to fresh air. Call a physician if symptoms develop or persist. \\ If ingestion of a large amount does occur, seek medical attention.

Ensure that medical personnel are aware of the material(s) involved, and take、 precautions to protect themselves.

Inhalation: Ingestion: General Advice:

SECTION 5

Flash Point:

-FIRE FIGHTING MEASURES:

Not available

1094 oF (590 o C) (calculated)

DRY sand, sodium chloride powder, graphite powder or Met-L-X powder. Do not get water inside containers. Carbon dioxide (CO2) foam water. May react violently with water.

Substance will react with water releasing flammable, toxic or corrosive gasses and runoff.

May include oxides of oxides of carbon.

Auto-Ignition Temperature: Suitable Extinguishing Media: Fire Fighting Equipment/Instructions:

Extinguishing Media Which Must Not Be Used For Safety Reasons: General Fire Hazards:

Unusual Fire & Explosion Hazards:

Hazardous Combustion Products:

SECTION 6 —ACCIDENTAL RELEASE MEASURES:

Keep unnecessary personnel away. Ventilate closed spaces before entering. Sweep up or gather material and place in appropriate container for disposal. Avoid

dust formation. Cover with DRY earth, DRY sand, or other non-combustible

material followed with plastic sheet to minimize spreading or contact with rain. DO NOT GET WATER on spilled material or inside containers.

/Eliminate all ignition sources (no smoking, flares, sparks, or flames in immediate area).

Personal Precautions: Methods for Cleaning up:

Containment Procedures:

SECTION 7 -HANDLING AND STORAGE:

Handling:

Do not handle or store near an open flame, heat or other sources of ignition. Avoid contact with skin and eyes. Avoid prolonged exposure. Do not breathe gas/fumes/vapor/spray.

Keep away from heat and sources of ignition. Store in cool place. Keep container tightly closed. Keep the container dry.

Storage:

Information presented herein is believed to be accurate and reliable but is not intended to meet any specification and does not imply any guarantee or warranty by Atlantic Equipment Engineers. For more information and assistance, please call (201) 384-5606.

Atla ntic Equipme nt Engin eers, 13 Foster Street, P.O. Box 07621 ?

Page 2

181, Berge nfield, NJ

MATERIAL SAFETY DATA SHEET AL-100

SECTION 8

— EXPOSURE CONTROLS/PERSONAL PROTECTION:

Engineering Measures to Reduce Exposure: Ensure adequate ventilation, especially in confined areas. Personal Protective Equipment

Eye Protection :

Skin and Body Protection: Respiratory Protection:

Wear safety glasses with side shields. Wear suitable protective clothing.

When workers are facing concentrations above the exposure limit they must use appropriate certified respirators. A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements must be followed whenever work place conditions warrant a respirator's use.

When using do not smoke. Avoid contact with skin, eyes and clothing. Protective gloves.

Hygiene Measures:

Hand protection:

Exposure Limits

ACGIH - Threshold Limits Values - Time Weighted Averages (TLV-TWA)

Aluminum 7429-90-5 10 mg/m 3 TWA (metal dust)

OSHA - Final PELs - Time Weighted Averages (TWAs) Aluminum 7429-90-5

15 mg/m 3 TWA (total dust)

5 mg/m 3 TWA (respirable fraction)

SECTION 9

Form: Density:

— PHYSICAL & CHEMICAL PROPERTIES:

Solid

20.86 -22.53 lbs/gal (calculated) 2.5 —2.7 (calculated) 0 % Weight (calculated)

Specific Gravity : Volatile Organic - Wt. %:

SECTION 10

Stability:

—CHEMICAL STABILITY & REACTIVITY INFORMATION:

Risk of ignition. Stable at normal conditions.

Reacts violently with water, liberating highly flammable gases. Heat, flames and sparks. Exposure to moisture. Caustics. This product is incompatible with nitrates.

Hazardous Decomposition Products: Conditions to Avoid: Incompatibility:

SECTION 11 -TOXICOLOGICAL INFORMATION:

Routes of Exposure:

Inhalation.

Respiratory system, skin, eyes

NIOSH - Pocket Guide - Target Organs

Aluminum 7429-90-5

Information presented herein is believed to be accurate and reliable but is not intended to meet any specification and does not imply

any guarantee or warranty by Atlantic Equipment Engineers. For more information and assistance, please call (201) 384-5606.

181, Bergenfield, NJ 07621

Atlantic Equipment Engineers, 13 Foster Street, P.O. Box

Page 3

MATERIAL SAFETY DATA SHEET

AL-100

Not expected to be hazardous by OSHA criteria. Not expected to be hazardous by OSHA criteria.

Hazardous by OSHA criteria. Prolonged exposure may cause chronic effects. Contact may irritate or burn eyes. Irritating to respiratory system. Not expected to be hazardous by OSHA criteria.

Carcinogenicity: Sensitization: Chronic Toxicity: Local Effects:

Reproductive Toxicity:

Symptoms and Target Organs:

NIOSH - Pocket Guide - Target Organs

Aluminum 7429-90-5

Respiratory system, skin, eyes

SECTION 12

Ecotoxicity:

-ECOLOGICAL INFORMATION:

No information available; no data is available on the product itself. No data available for this product.

Environmental Effects:

SECTION 13

-DISPOSAL CONSIDERATIONS:

This product, in its present state, when discarded or disposed of, is not a

hazardous waste according to Federal regulations (40 CFR 261.4(b ［⑷).Under RCRA, it is the responsibility

of the user of the product to determine, at the time of disposal, whether the product meets RCRA criteria for hazardous waste. Material should be recycled if possible.

Disposal instructions:

SECTION 14

DOT IATA IMDG

-TRANSPORT INFORMATION:

Notregulated. Notregulated. Notregulated.

SECTION 15

Inventories

-REGULATORY INFORMATION:

Country(s) or Reaion Australia Canada Canada China Europe Europe Japan Korea New Zealand Philippines United States & Puerto Rico

Inventory Name

Australian Inventory of Chemical Substances (AICS) Domestic Substances List (DSL) Non-Domestic Substances List (NDSL)

Inventory of Existing Chemical Substances in China (CCS) European Inventory of New and Existing Chemicals (EINECS) European List of Notified Chemical Substances (ELINCS)

Japanese Inventory of Existing and New Chemical Substances (ENCS) Korean Inventory of Chemicals (KICS)

New Zealand Inventory

Philippine Inventory of Chemicals and Chemical Substances (PICCS) Toxic Substances Control Act (T SCA) Inventory

On inventory

Yes Yes No Yes No No No Yes No Yes Yes

A “YES indicates that all components of this product comply with the inventory requirements administered by the governing country(s).

Information presented herein is believed to be accurate and reliable but is not intended to meet any specification and does not imply any guarantee or warranty by Atlantic Equipment Engineers. For more information and assistance, please call (201) 384-5606.

Atla ntic Equipme nt Engin eers, 13 Foster Street, P.O. Box 07621 ?

Page 4

181, Berge nfield, NJ

MATERIAL SAFETY DATA SHEET AL-100

US Federal Regulations:

This product is a \Communication Standard, 29 CFR 1910.1200.

All components are on the U.S. EPA TSCA Inventory List.

CERCLA/SARA - Section 313 - Emission Reporting

Superfund Amendments and Reauthorization Act of 1986 (SARA) Component Aluminum State Regulations:

CAS # 7429-90-5

99.65

Data Value 1.0% de minimis concentration (dust or fume only)

This product does not contain a chemical known to the State of California to cause cancer, birth defects or other reproductive harm.

Present

sn 0054 (dust and fume); sn 2110 (powder, coated); sn2111 (powder, uncoated, non-pyrophoric) Environmental hazard Toxic, Flammable

No Yes Yes Yes No No Yes 1 1 2

Massachusetts - Right to Know List

7429-90-5 Aluminum New Jersey - Right to Know Hazardous Substance List

Aluminum 7429-90-5 Pennsylvania RTK (Right to Know) List Aluminum

7429-90-5 Rhode Island Hazardous Substance List Aluminum 7429-90-5 Section 302 Extremely Hazardous Substance: Section 311 Hazardous Chemical: HazardCategories:

Immediate Hazard Delayed Hazard Fire Hazard Pressure Hazard Reactivity Hazard

HMIS Ratings:

Health Flammability Reactivity

SECTION 16 -OTHER INFORMATION:

a

“ Although the information and recommendations set forth herein (hereinafter Information ” ) are presented in good faith an

believed to be correct as of the date hereof, Atlantic Equipment Engineers makes no representations as to the completeness or accuracy thereof.

Information is supplied upon the condition that the persons receiving same will make their own determination as to its suitability for their purposes prior to use. In no event will Atlantic Equipment Engineers be responsible for damages of any nature whatsoever resulting from the use of or reliance upon Information.

NO REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS OR IMPLIED, OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, THAT THE PRODUCTS TO WHICH THE INFORMATION REFERS MAY BE USED WITHOUT INFRINGING THE INTELLECTUAL PROPERTY RIGHTS OF OTHERS, OR OF ANY OTHER NATURE ARE MADE HEREUNDER WITH RESPECT TO INFORMATION OR THE PRODUCT TO WHICH INFORMATION REFERS. IN NO CASE SHALL THE INFORMATION BE CONSIDERED A PART OF OUR TERMS AND CONDITIONS OF SALE. Issued: 03/08 Reviewed: 03/09

Information presented herein is believed to be accurate and reliable but is not intended to meet any specification and does not imply any guarantee or warranty by Atlantic Equipment Engineers. For more information and assistance, please call (201) 384-5606.

Glossary of abbreviati ons

ACGIH = America n Conference of Gover nmen tal In dustrial Hygie ni sts

Atla ntic Equipme nt Engin eers, 13 Foster Street, P.O. Box 07621 ?

Page 5

181, Berge nfield, NJ