沃尔玛产品检验标准 - 图文

Suede Leather 仿绒皮 PU Coated Leather PU二层革 No excessive fiber loss 无过多纤维脱落 No peeling of the finish or coating 无表层剥离 Note: Oily, Antiqued, or Burnished leathers are excluded 不适用于油性皮，仿古皮或打蜡皮 COLORFASTNESS TO CROCKING 褪色测试(磨擦色牢度) Leather Type AATCC 8 (Gray Scale) Front Side 正面 Back Side Unlined Only 背面 无内衬 Smooth Leather 光面皮革 Suede Leather 仿绒皮 Nubuck Leather 牛巴皮 Oily, Burnished, & Antiqued Leather 油皮/打腊皮/仿古皮 Dry ≥ 3.5 Wet ≥ 3.0 Dry ≥ 2.5 Wet ≥ 2.0 Dry ≥ 2.5 Wet – N/A Dry ≥ 3.5 Wet ≥ 3.0 Dry ≥ 2.5 Wet ≥ 2.0 Dry ≥ 3.5 Wet ≥ 3.0 Tested @ Dry ≥ 3.5 Wet ≥ Complete Shoe 3.0 Level Note: For suede uppers w/ adjacent white color components the standard is Dry ≥ 3.5 & Wet ≥ 3.0 White or light color leather is excluded 帮面有白色配饰的仿绒皮测试标准为干式≥ 3.5 & Wet湿式≥ 3.0 不适用于白色或浅色皮革 COLORFASTNESS TO PERSPIRATION 褪色测试(汗浸色牢度) Smooth or Suede Leather & Oily, Burnished, Antique & Nubuck Leather Test for unlined AATCC 15 ≥ 3.0 (Gray Scale) back side only 磨面皮,绒面革,油皮,打蜡皮,牛巴革,只测试背面没有内衬的. Note: The following footwear categories / components are excluded: 不适用于下列鞋子/部件 ?Soccer Slides & Sandal Straps 足球鞋&凉鞋面带 ?Foldings & Bindings in the topline / collar area 鞋口/领口折边&滚边 ?White or light color leather 白色或浅色皮革 WASHING TEST - STAINING / COLOR CHANGE 水洗测试 – 染色/变色 White leather upper material – 白色皮革帮面材料 (for vulcanized shoes only) 仅适用于硫化鞋 AATCC TS and All leather upper material intended to be 007 used in shoes marketed as washable 用于水洗类鞋子的皮革 ANTI-YELLOWING TO UV LIGHT 耐黄测试 – UV光照射 White Color PU-Coated Action Leather Upper Materials (including decorative components) Staining & Color Change: ≥ 4.0 (Gray Scale) Note: Upper material is air dried following washing test 帮面材料是晾干的要做水洗测试 ≥ 4.0 (Gray Scale) UV Light 30W, 3-25 SOP 20cm x 3 hrs 白色涂布皮鞋帮面材质(含装饰部件) ≥ 4 级( 30瓦 UV, 20cm x 3 小时 4.1.5 SHOE LACES 鞋带

测试项目 测试方法 结果要求 ANTI-YELLOWING TO UV LIGHT 耐黄测试(UV光照射) White Color Laces 白色鞋带 3-25 SOP ≥ 4.0 (Gray Scale) UV Light 30W, 20cm x 3 hrs ≥ 4 级( 30瓦 UV, 20cm x 3 小时 PHENOLIC YELLOWING 酚黄测试 White Color Laces白色鞋带 ISO 105-X18 ≥ 4.5 (Gray Scale) COLORFASTNESS TO CROCKING 摩擦色牢度 Dark Color Laces w/White Footwear (only) 白色鞋子的深颜色鞋带 AATCC 8 (Gray Scale) Dry ≥ 3.5 Wet ≥ 3.0 Note: Colorfastness performed on cotton and cotton/poly laces 褪色测试适用于棉和涤棉鞋带 LACE TO LACE ABRASION RESISTANCE 鞋带与鞋带间耐磨测试 Athletic, Work Shoes & Boots, Hikers, and 154 Tredsafe Footwear 运动鞋，工作鞋地，靴子，旅游鞋 Dress, Casual and Vulcanized Footwear 时装鞋，休闲鞋，硫化鞋 SATRA TM No lace breakage or excessive visible surface damage @ ≥ 3,000 cycles ≥3,000次时表面无明显破损和断裂 No lace breakage or excessive visible surface damage @ ≥ 1,000 cycles ≥1,000次,表面无明显破损和断裂 4.1.6 LINKING TAPE魔术带

测试项目 PEELING STRENGTH 剥离强度 All SHEARING STRENGTH 剪力强度测试 All 测试方法 结果要求 ASTM D5170 ≥ 170 g / cm ASTM D5169 ≥ 750 g / cm2 4.1.7 HEELS 鞋跟

测试项目 HEEL FATIGUE RESISTANCE耐疲劳测试 Heels ≥ 3 cm in height which contain either a steel pin or steel tube reinforcement 适用于内有钢钉或钢管且高度≥3CM的跟 HEEL IMPACT RESISTANCE撞击测试 Required for the following heels: Height 5-7 cm w/external stem perimeter ≤5 cm & Height > 7 cm w/external stem perimeter ≤ 10 cm 适用于跟高度5-7cm且跟主干周长≤5 cm；及跟高度> 7 cm 跟主干周长≤ 10 cm 测试方法 结果要求 No Breakage - @ 14,000 impacts w/ SATRA TM21 0.68 joule for slender heel 用0.68焦耳的力度撞击14000次无破损 No cracking, breaking, or bending (> 3 mm) of heel stem after being subjected to 10 consecutive impacts of increasing force, and No cracking or breaking of the heel stem after an additional 17 impacts of increasing force, as specified in BS 5131§ 4.8 以每次力度递增,10次连续撞击后无(大于3MM)破裂或弯曲等现象，继续以每次力度递增，继续进行17次的撞击后无开裂、断BS 5131 § 4.8 Modified 裂或弯曲等现象（以BS 5131§ 4要求的力度） 4.1.8 TOPLIFTS 天皮

测试项目 EFFECTIVE TOPLIFT THICKNESS 实用厚度 测试方法 结果要求 Must be constructed of polyurethane (PU) or TPR 必须是PU或TPR材质 Must include a steel or die-cast alloy stem 必须使用钢或压铸合金材质 6 mm 4 mm 3 mm 2mm Toplift less than 625 mm2 in surface area VISUAL EVALUATION / 天皮触地面面积小于625 mm2 CALIPER Toplift less than 8 mm across in any direction 天皮任一平面方向小于8毫米 Minimum overall thickness 最小厚度 Men’s & Women’s 男鞋,女鞋 Children’s 童鞋 Distance between wear surface & insert metal head 天皮金属插柱离触地面 Distance above & around the sides of the insert metal head 天皮金属插柱离上部和周围任一边缘 All ABRASION RESISTANCE 耐磨 PU Toplift PU天皮 PVC Toplift PVC天皮 TPR Toplift TPR天皮 PULLING STRENGTH OF HEAD 钉头拉力强度 All 所有天皮 VISUAL EVALUATION Must be ribbed or textured 所有天皮要求有底纹 Loss in thickness is < 0.3 mm / cm2 磨损厚度< 0.3 mm / cm2 TEST METHOD Loss in thickness is < 0.4 mm / SZ- A02 cm2磨损厚度< 0.4mm / cm2 Loss in thickness is < 0.5 mm / cm2磨损厚度< 0.5 mm / cm2 SATRA TM108 > 14 kg 4.1.9 EXPOSED METAL HARDWARE外露铁件

测试项目 CORROSION RESISTANCE 防锈测试(耐腐蚀) Must be properly finished to inhibit corrosion 必须适当做防锈处理 测试方法 结果要求 3-19 SOP 100°F, 100% RH-12 hrs No corrosion on surface 100℉,100%湿度，放置12小时表面无锈痕 4.1.10 ZIPPERS 拉链

测试项目

测试方法

结果要求

PULLER ATTACHMENT STRENGTH 拉链头拉脱强度

Non-functional (decorative) zippers are excluded from tests 非功能性(装饰性)拉链不需测试

SATRA TM52 Adults & Boys 成人鞋/男童鞋

≥ 25 kg

≥ 20 kg ≥ 15 kg Misses / Youth 女童/青年鞋 Infant / Toddler 婴童/学步鞋 SLIDER LOCKING STRENGTH 闭锁强度测试 SATRA TM226 Adults & Boys 成人鞋/男童鞋 Misses / Youth 女童/青年鞋 Infant / Toddler 婴童/学步鞋 TOP & BOTTOM STOP ATTACHMENT STRENGTH锁头和锁尾拉脱强度 SATRA TM53 All BREAKING STRENGTH OF CHAIN - CROSSWISE STRENGTH拉链齿啮合强度 (横向抗拉) SATRA TM51 All ≥ 7 kg ≥ 5 kg ≥ 3.5 kg ≥ 13.5 kg ≥ 35 kg

4.1.11 STEEL SHANKS 钢芯

测试项目

HARDNESS 硬度 All STIFFNESS 韧性强度 < 50 mm Heel Height 鞋跟高度< 50 mm 50 - 74 mm Heel Height 鞋跟高度50 - 74 mm

75 - 99 mm Heel Height 鞋跟高度75 - 99 mm

≥100 mm Heel Height 鞋跟高度≥100 mm

测试方法

结果要求

ASTM E18

45 TO 55 HRC & Tempered ≥ 400 kN.mm2 ≥ 800 kN.mm2

SATRA TM58

≥ 1200 kN.mm2 ≥ 1600 kN.mm2

4.1.12 GORES松紧带

测试项目 测试方法 结果要求 RESISTANCE TO REPEATED EXTENSION 反复拉伸性能测试 Gores

Infant/Toddler Footwear婴童鞋/学步鞋

SATRA

Others 其他 TM103

< 10% Rubber thread breakage, and no damage on surface

5,000 cycles 10,000 cycles 5,000次

10,000次反复延伸后表面无破损且小于10%的橡筋断裂

4.1.13 LININGS 内里

测试项目 测试项目 Lining Material 内里材料 Fabric (including silk screen print) 纺织品（包含印刷） 测试方法 结果要求 测试方法 Denim 牛仔布 Leather 皮革 AATCC 8 (Gray Scale) Dry ≥ 3.5 ≥ 3.0 ≥ 3.5 Wet ≥ 3.0 ≥ 2.0 ≥ 3.0 Note: White or light color linings are excluded 不适用于白色或浅色内里 COLORFASTNESS TO PERSPIRATION 褪色测试（汗浸色牢度） Fabric (including silk screen print) 纺织品（包含印 刷） Denim 牛仔布 Leather 皮革 AATCC 15 (Gray Scale) ≥ 3.0 ≥ 2.0 ≥ 3.0 Note: The following footwear categories / components are excluded: ?Soccer Slides & Sandal Straps ?Foldings & Bindings in the topline / collar area ?White or light color linings 不适用于下列鞋了及部件: 足球鞋&凉鞋帮面 鞋口/领口折边&捆边 白色或浅色内里 FORMALDEHYDE甲醛含量 Fabric Lining Material for 纺织品内里材料 Infant sizes 1-6 & Toddler sizes 7-11 婴童1-6码&学步鞋7-11码 Pre-screening spot test 预筛选点测试 Extraction test 萃取测试 AATCC 94 JIS 1041L < 20 ppm ANTI-YELLOWING TO UV LIGHT 耐黄测试 – UV光照射 White Color Lining Materials which are located on area of the shoe that is exposed to light (i.e. topline / collar area) 暴露在阳光下的鞋子白色内里材料(如鞋口/领口) Note: Sock linings are excluded for closed-up footwear 不适用于密帮鞋的前垫皮 3-25 SOP ≥ 4.0 (Gray Scale) UV Light 30W, 20cm x 3 hrs ≥ 4.5 (Gray Scale) Exhibits no wear through Tested dry @ 12 Kpa load for the following number of revolutions:以干式12Kpa的重力, 通过以下次数后无磨损 PHENOLIC YELLOWING 酚黄测试 White Color Fabric 白色布料 ABRASION RESISTANCE 耐磨测试 Counter Linings –后踵套- All fabric Leather, & LAMI Suede 所有纺织品,皮鞋&纳米绒皮 Heavy Duty –高强度 Work Shoes*, Hikers*, Tredsafe *Except men’s work shoes and hikers 工作鞋,旅游鞋,不含男式工作鞋,旅游鞋 For Men’s Work Shoes & Hikers 男式工作鞋&旅游鞋 ISO 105-X18 SATRA TM31 51,200 revolutions 转 100,000 revolutions转