2020-2021学年
仁爱版七年级英语下册
词汇讲义拓展学习法
第250组
wear
1) wear [英][we?(r)] [美][w?r] 磨损 1.
Effect of Polarization Potential on Impact Corrosive Wear Behavior of High Manganese Steel;
高锰钢在不同极化电位下的冲击腐蚀磨损行为 2.
Development of Research on Friction and Wear of High Performance and high Temperature Polymer Composites;
高性能耐高温聚合物复合材料的摩擦磨损性能研究 3.
Review on the friction and wear performances of magnesium matrix composites; 镁基复合材料磨损性能研究进展 4.
gradual(wear-out) failure 渐发性（磨损）故障 5.
scuff (up) one's shoes 把鞋子磨损 [穿坏] 6.
The main wear mechanisms are adhesion, diffusion and fatigue. 磨损机理主要是粘结磨损、扩散磨损以及疲劳磨损。 7.
1
2020-2021学年
仁爱版七年级英语下册
词汇讲义拓展学习法
fair water and tear gradual deterioration 正常磨损和自然损耗 8.
Grain-abrasion Behaviour of Wear-Resistant Steel BHARDY 耐磨钢BHARDY的磨粒磨损行为 9.
Under the condition of boundary lubrication,adhere wear mechanism and abrasive grain wear mechanism do the business at the same time.
在边界润滑条件下,镀层的磨损机制为粘着磨损与磨粒磨损并存. 10.
To wear away(the edges of fabric, for example)by rubbing. 磨损通过磨耗而使（如织物的边缘）破损 11.
relating to or caused by attrition. 与磨损有关，或因磨损引起。 12.
Gradual impairment or diminution resulting from use or attrition. 穿破，磨损因使用或磨损造成的逐渐损坏或减少 13.
The process of wearing down or rubbing away by means of friction. 磨损，磨耗破损的过程或是因摩擦而损伤 14.
The study indicates that main types of damage to the coupler are adhesive damage and abrasion damage.
2
2020-2021学年
仁爱版七年级英语下册
词汇讲义拓展学习法
研究表明,车钩磨损的主要形式是粘着磨损以及伴随粘着磨损而产生的磨粒磨损。 15.
The wear mechanism of stainless steel against copper based sintered alloy is mainly attributed to adhesion,abrasion and oxidation.
不锈钢/铜基烧结合金材料的磨损机制主要是粘着磨损及氧化磨损。 16.
The Method for Determining the Abrasion Value and Abrasion Life of Tooth Surfaces in a Helical Gearing by Means of the Abrasion Experiment 借助磨损实验确定斜齿齿轮机构齿面磨损量及磨损寿命的方法 17.
To deface by covering with marks. 磨损，毁损因痕迹斑斑而受损伤 18.
A frayed or threadbare spot, as on fabric. 磨损处（如织物上的）磨散或磨光绒毛之处 2) wear [英][we?(r)] [美][w?r] 摩擦磨损 1.
The influence of heat treatment on phase structure and wear characteristics of the coating was investigated by DSC,XRD,microhardness measurement and wear tests. 采用超音速火焰喷涂技术在0Cr13Ni5Mo不锈钢基体上制备了铁基非晶涂层,研究了500℃~800℃不同温度热处理对涂层的相组成和摩擦磨损性能的影响。 2.
3
2020-2021学年仁爱版英语七年级下册词汇讲义拓展学习法(第250组)
