MT9V113D00STCK22AC1-200评估板概述
评估板旨在演示该半导体图像传感器产品的功能。 该床头 板旨在直接插入Demo 2X系统。 板上的测试点和跳线可访问时 钟，I / O和其他杂项信号。
?时钟输入 ?默认– 27 MHz晶体振荡器
?可选的演示2X控制的MClk ?两线串行接口 ?可选基地址 ?并行接口 ?MIPI接口?符合ROHS
EVAL BOARD USER’S MANUAL
MT9V113D00STCK22AC1-200特征
Figure 1. MT9V113 Evaluation Board
框图
Figure 2. Block Diagram of MT9V113PACSTCH?GEVB
MT9V113PACSTCH?GEVB
Top View
+3V3_VAA J10
+1V8_VDD J13
FLASH JP1
CONFIG. SW1 ATEST J14 GPIO[1:0] J4 RESET SW1 +VDDIO J9
ON_LED SW5 CLK_SELECT J1
Figure 3. Top View of Evaluation Board
Bottom View
MIPI Connector U5
EEPROM ADDR SW4
Baseboard Connector J2
Figure 4. Bottom View of the Evaluation Board ? Connectors
2
跳线针位置
床头板上的跳线从引脚最左侧的引脚1开始。 分组的跳线会随着每个跳线的增加而增加引脚尺寸。
MT9V113PACSTCH?GEVB
Pin 1 Pins 1?4
Figure 5. Pin Locations for a Single Jumper. Pin 1 is Located at the Leftmost Side
and Increases as it Moves to the Right
ADR1
ADR0
Figure 6. Address Switch Locations in their Default Positions. The first Switch(ADR0)
and the second Switch (ADR1) of SW3 are set to ON
STDBY
OE_N
Figure 7. Switch Descriptions od Switch SW4 in their Default Positions.The first Switch (STDBY)
is Set OFF while the Second Switch (OE_N) is Set to it
Jumper/Header Functions & Default Positions Table 1. JUMPERS AND HEADERS
Jumper/Header No. Jumper/Header Name
JP1 J4
J9 J10 J13
Pins Description
Connects to external flash Connects to GPIO signals
FLASH Open (Default) GPIO[1:0] Open (Default) +VDDIO
+3V3_VAA +1V8_VDD
1?2 (Default) Connects to on-board +3V3_VDD power supply Open External power supply connection 1?2 (Default) Connects to on-board +3V3_VAA power supply Open External power supply connection 1?2 (Default) Connects to on-board +1V8_VDD power supply Open
External power supply connection
MT9V113D00STCK22AC1-200 CMOS数字图像传感器
