.
（有些项目为机器可选配置） General 常规信息 Option System Information 系统信息 Lists the the following: Description 中文 This section lists out the primary hardware features of the 该选项列出系统的主要硬件信息。此处仅提供信息，system. There are no configurable options in this section, only 无法修改。 information. ? 系统信息 o BIOS 版本 o 机器编号 o 资产编号 o Ownership编号 o 出厂日期 o Ownership日期 ? 内存信息 ? System Information o BIOS Version o Service Tag o Asset Tag o Ownership Tag o Manufacture Date o Ownership Date ? Memory Information o 安装内存容量 o 可用内容容量 o 当前内存频率 o Memory通道 o Memory技术 o DIMM A尺寸 o DIMM B尺寸 ? CPU信息 o Memory Installed o Memory Available o Memory Speed o Memory Channel Mode o Memory Technology o DIMM A Size o DIMM B Size ? Processor Information o CPU型号 o CPU核数（几核） o CPU ID o 当前时钟频率 o 最小时钟频率 o 最大时钟频率 ? 设备信息 o Processor Type o Core Count o Processor ID o Current Clock Speed o Minimum Clock Speed o Maximum Clock Speed ? Device Information o 主硬盘容量 o 光驱型号 o 系统eSATA设备 o Dock eSATA 设备 o o 显卡 o 显卡BIOS版本 o 显存大小 o 液晶屏类型 o 分辨率 o o 声卡 o Modem控制器 o Primary Hard Drive o Modular Bay Device o System eSATA Device o Dock eSATA Device o o Video Controller o Video BIOS Version o Video Memory o Panel Type o Native Resolution .
.
o o Audio Controller o Modem Controller o Wi-Fi Device o Cellular Device o Bluetooth Device o Wi-Fi 设备型号 o Cellular Device o 蓝牙 Battery Information 电池信息 Boot Sequence 启动顺序 The computer attempts to boot from the sequence of devices 计算机尝试从以下列表顺序启动： specified in this list: Indicates the primary battery and the media bay battery status. 侦测主电池和第二块电池状态，也显示AC 外接电源Also displays the AC adapter type connected to the system. 的型号。 ? ? ? ? ? ? ? Diskette drive USB Storage Device CD/DVD/CD-RW Drive. Internal HDD (IRRT) Cardbus NIC Onboard NIC 软驱 USB存储设备 光驱 Internal HDD (IRRT) Cardbus NIC Onboard NIC ? ? ? ? ? 我们可以勾选需要启动的设备。并在界面右侧对显示This list specifies the order that the BIOS searches devices 的设备设置启动的顺序，可以通过鼠标也可以通过上when trying to find an operating system to boot. To change the 下键选择。 boot order, select the device to be changed in the list then click the up/down arrows or use the keyboard PgUp/PgDn keys to 我们可以通过选择UEFI BIOS启动，点击“Add Boot change the boot order of the device. The boot devices can also Option”自定义启动选项。 be de-selected from the list using the check boxes. This also where the UEFI boot option can be enable or disable. Date/Time Displays current date and time settings. 日期/时间 System Configuration 系统配置 Option Description 描述 启用或禁用主板LAN控制器；设置有： Enables or disables the onboard LAN controller. The settings Integrated NIC 集成网卡 Default setting: Enabled w/PXE are Disabled, Enabled and Enabled w/PXE. 禁用， 启用 或启用w/PXE； 默认设置是启用w/PXE 显示当前的日期和时间 .
.
Parallel Port 并口 This field determines how the parallel port on the docking station operates. The settings are Disabled, AT, PS2 and ECP. Default setting: ECP 并口设置选项： 禁用，AT，PS2 和ECP 默认设置是ECP。 串口设置选项： 禁用，COM1，COM2，COM3，COM4 默认设置是COM1 SATA Operation 设置选项： 禁用，ATA ， AHCI 和 Raid On 默认设置是 Raid On=SATA 设置支持Raid Serial Port 串口 This field determines how the integrated serial port operates. The settings are Disabled, COM1, COM2, COM3 and COM4. Default setting: COM1 This option configures the operating mode of the internal SATA SATA Operation SATA设置 hard drive controller. The settings are Disabled, ATA, AHCI, and RAID On. Default setting: RAID On = SATA is configured to support RAID mode Use the check boxes to enable/disable the following devices: 请点击复选框启用/禁用下面设备： ? ? Miscellaneous Devices 多种设备设置 Internal Modem Module Bay ExpressCard or PC Card Media Card, PC Card and 1394 External USB Port Microphone eSATA Ports Hard Drive Free Fall Protection Camera / Microphone ? ? ? ? ? ? ? ? ? 内置Modem 模块设备 ExpressCard 或 PC Card SD卡, PC卡和1394 外置USB口 内置麦克风 eSATA口 自由落体硬盘保护 摄像头 / 麦克风 ? ? ? ? ? ? ? Default setting: All enabled. This field lets you choose the operating mode of the Latitude Latitude On?； Reader Default setting: Enabled Keyboard Illumination 键盘背景光（如没有配置背景光键盘该项不会出现） On?； Reader. 默认所有设备启用。 启用或禁用Latitude On Reader 默认启用Latitude On Reader。 This field lets you choose the operating mode of the keyboard 键盘背景光设置选择： illumination feature. Settings are Disabled, Auto ALS and Input and Auto Input Only Default setting: Disabled Video 显示设置 禁用，自动ALS调节，自动调节 默认设置禁用键盘背景光。 Option Description 描述 .
.
Ambient Light Sensor 环境感光器 LCD Brightness LCD亮度 Enabling ambient light sensor will allow your system to automatically change the brightness of your system's LCD panel 自动根据周围环境改变显示器的亮度 based on the amount of light in the environment. 默认设置禁用。 Default setting: Disabled This option (represented by a slider bar for On Battery and On AC) sets the panel brightness when the ambient light sensor is off. Security 安全设置 在环境观光器关闭时，可以分别设定连接电源或电池时显示器的亮度。 Option Admin Password 管理员密码 Description 描述 This field lets you set, change, or delete the administrator 该页面可以设置，修改，或删除Admin 密码。设置了(admin) password (sometimes called the \password). The Admin密码将启用下面安全功能： admin passwaord enables several security features when set including: ? ? ? ? 限制改变BIOS设置 限制F12启动菜单的设备 禁止修改Owner和Asset编号 在POST界面可以替代system password ? ? ? ? Restricts changes to the settings in Setup Restricts the boot devices listed in the F12 Boot Menu to those enabled in the \Prohibits changes to the owner and asset tags. Substitutes for the system password if the system prompts for a password during power on. 默认没有设置Admin 密码。 注意：如果删除Admin 密码，System 密码也被删除。Admin密码可以被使用去删除硬盘密码。但是必须首Successful changes to this password take effect immediately. 先设置Admin密码；如果已经设置了System密码或硬盘密码，不能再设置Admin密码。 Default Setting: Not set ☆ NOTE: If you delete the admin password, the system password is also deleted. Also, the admin password can be used to delete the HDD password. For this reason, you cannot set an admin password if a system password or HDD is already set. The admin password must be set first if used in conjunction with a system and/or HDD password. System Password 系统密码 This field lets you set, change, or delete the system password 该页面可以设置，修改，或删除System 密码。（之(previously called the \Default Setting: Not set This field lets you set, change, or delete the password on the system's internal hard disk drive (HDD). Successful changes take place immediately and require a system restart. The HDD password travels with the hard drive, so the HDD is protected 前版本将Primary密码） 默认没有设置System密码。 该页面可以设置，修改，或删除硬盘密码。硬盘密码将跟随硬盘，将硬盘连接到其他机器，也需要输入硬盘密码。 默认没有设置硬盘密码。 Internal HDD Password 内置硬盘密码 .
.
even when installed in another system. Default Setting: Not set This option lets you bypass the system and internal HDD password prompts during a system restart or when resuming from a standby 在系统重启或者休眠恢复状态，让你绕过硬盘和Password Bypass 密码跳过 state. Settings are Disabled and Reboot Bypass System密码。设置选项：禁用和重启绕过。 The system will always prompt for the set system and internal 系统关机到开机（冷启动时），仍然需要输入密码。 HDD password when powered on from an off state (cold boot). 默认设置：禁用 Default Setting: Disabled 该选项启用后是在设置了Admin密码后，可以对系统This option lets you determine whether changes to the System 和硬盘密码进行修改和设置，但不能修改BIOS其他项目； 默认选择允许对非Admin密码修改。 可以在需修改的页面的点击Unlock后，输入Admin密码对BIOS进行修改。 This option enforces strong passwords. If enabled, all passwords must contain at least one uppercase character, one Password Change and HDD passwords are permitted when an Admin password is set. Use the check box to allow or disallow changes. 密码修改设置 Default Setting: Allow Non-Admin Password Changes checked Strong Password lowercase character and be at least 8 characters long. Enabling this feature automatically changes the default minimum 强安全密码 password length to 8 characters Default Setting: Disabled This option lets you control whether the Trusted Platform Module (TPM) in the system is enabled and visible to the operating system. When disabled (check box is empty), the BIOS will not turn on the TPM during POST. The TPM will be enabled (check box filled) the BIOS will turn the TPM on during POST so the it can be used by the operating system. TPM Security ☆ NOTE: TPM安全设置 Disabling this option does not change any settings you may have made to the TPM, nor does it delete or change any information or keys you may have stored there. It simply turns off the TPM so that it cannot be used. When you re-enable the TPM, it will function exaclty as it did before it was disabled. 启用强大密码功能，所有的密码设置时必须包括至少一个大写字母和一个小写字母，至少8位。 默认禁用。 TPM模块在中国大陆区域没有提供。该项让您控制是否在操作系统下是否启用或者可见TPM。 当禁用TPM （复选框为空），在POST界面，BIOS不non-functional and invisible to the operating system. When 能启用TPM。在操作系统下，TPM不可见，无功能。 当启用TPM， 在POST界面，BIOS即可启用TPM，在操作系统下，TPM可以正常使用。 一旦TPM启用，系统将自动重启。 可以选择的设置项：不激活、激活、清除TPM信息 Once TPM is enabled (check box filled), system will be shut down .
戴尔DELL笔记本BIOS中英文对照表
