ipmitool工具常用命令汇总

ipmitool

目录

工具常用命令汇总

1.工具的安装

yum install -y OpenIPMI ipmitool 开启服务

/etc/ipmi status /etc/ipmi start

[root@cell83 ~]# ipmitool -V ipmitool

2.命令的help

明细的命令参考man ipmitool 或者附件

[root@cell83 ~]# ipmitool -h ipmitool

usage: ipmitool [options...] -h This help

-V Show version information

-v Verbose (can use multiple times)

-c Display output in comma separated format

-d N Specify a /dev/ipmiN device to use (default=0) -I intf Interface to use

-H hostname Remote host name for LAN interface -p port Remote RMCP port [default=623] -U username Remote session username

-f file Read remote session password from file

-z size Change Size of Communication Channel (OEM) -S sdr Use local file for remote SDR cache

-D tty:b[:s] Specify the serial device, baud rate to use

and, optionally, specify that interface is the system one

-4 Use only IPv4 -6 Use only IPv6

-a Prompt for remote password

-Y Prompt for the Kg key for IPMIv2 authentication -e char Set SOL escape character

-C ciphersuite Cipher suite to be used by lanplus interface -k key Use Kg key for IPMIv2 authentication

-y hex_key Use hexadecimal-encoded Kg key for IPMIv2 authentication

-L level Remote session privilege level [default=ADMINISTRATOR] Append a '+' to use name/privilege lookup in RAKP1 -A authtype Force use of auth type NONE, PASSWORD, MD2, MD5 or OEM -P password Remote session password

-E Read password from IPMI_PASSWORD environment variable -K Read kgkey from IPMI_KGKEY environment variable -m address Set local IPMB address

-b channel Set destination channel for bridged request -t address Bridge request to remote target address

-B channel Set transit channel for bridged request (dual bridge) -T address Set transit address for bridge request (dual bridge) -l lun Set destination lun for raw commands

-o oemtype Setup for OEM (use 'list' to see available OEM types) -O seloem Use file for OEM SEL event descriptions

-N seconds Specify timeout for lan [default=2] / lanplus [default=1] interface

-R retry Set the number of retries for lan/lanplus interface [default=4] Interfaces:

open Linux OpenIPMI Interface [default] imb Intel IMB Interface lan IPMI LAN Interface

lanplus IPMI RMCP+ LAN Interface

serial-terminal Serial Interface, Terminal Mode serial-basic Serial Interface, Basic Mode

usb IPMI USB Interface(OEM Interface for AMI Devices) Commands:

raw Send a RAW IPMI request and print response

i2c Send an I2C Master Write-Read command and print response spd Print SPD info from remote I2C device lan Configure LAN Channels

chassis Get chassis status and set power state power Shortcut to chassis power commands event Send pre-defined events to MC

mc Management Controller status and global enables sdr Print Sensor Data Repository entries and readings sensor Print detailed sensor information

fru Print built-in FRU and scan SDR for FRU locators

gendev Read/Write Device associated with Generic Device locators sdr

sel Print System Event Log (SEL)

pef Configure Platform Event Filtering (PEF)

sol Configure and connect Serial-over-LAN

tsol Configure and connect with Tyan Serial-over-LAN isol Configure Serial-over-LAN

user Configure Management Controller users channel Configure Management Controller channels session Print session information

dcmi Data Center Management Interface nm Node Manager Interface

sunoem OEM Commands for Sun servers kontronoem OEM Commands for Kontron devices picmg Run a PICMG/ATCA extended cmd

fwum Update IPMC using Kontron OEM Firmware Update Manager firewall Configure Firmware Firewall delloem OEM Commands for Dell systems shell Launch interactive IPMI shell exec Run list of commands from file

set Set runtime variable for shell and exec hpm Update HPM components using PICMG file ekanalyzer run FRU-Ekeying analyzer using FRU files ime Update Intel Manageability Engine Firmware vita Run a VITA extended cmd lan6 Configure IPv6 LAN Channels

3.查看管理口的IP地址

[root@cell83 ~]# ipmitool -I open lan print

[root@cell83 ~]# ipmitool -I open lan print | grep IP IP Address Source : Static Address IP Address :

IP Header : TTL=0x40 Flags=0x40 Precedence=0x00 TOS=0x10 Default Gateway IP : Backup Gateway IP :

4.管理底盘chassis配置

[root@cell83 ~]# ipmitool -I open chassis help

Chassis Commands: status, power, identify, policy, restart_cause, poh, bootdev, bootparam, selftest

查看底盘配置汇总

[root@cell83 ~]# ipmitool -I open chassis status System Power : on Power Overload : false Power Interlock : inactive Main Power Fault : false Power Control Fault : false Power Restore Policy : previous Last Power Event :

Chassis Intrusion : inactive Front-Panel Lockout : inactive Drive Fault : false Cooling/Fan Fault : false

Sleep Button Disable : not allowed Diag Button Disable : allowed Reset Button Disable : not allowed Power Button Disable : allowed Sleep Button Disabled: false Diag Button Disabled : true Reset Button Disabled: false Power Button Disabled: false 管理电源

查看当前电源状态

[root@cell83 ~]# ipmitool -I open chassis power status Chassis Power is on 打开电源

ipmitool -I open chassis power on 关闭电源

ipmitool -I open chassis power off 重启电源

ipmitool -I open chassis power cycle 重置电源

ipmitool -I open chassis power reset 其他配置

ipmitool -I open chassis power diag ipmitool -I open chassis power soft 管理时间间隔 查询时间间隔：