TMS320C6414, TMS320C6415, TMS320C6416FIXED-POINT DIGITAL SIGNAL PROCESSORS
SPRS146N ? FEBRUARY 2001 ? REVISED MAY 2005documentation support
Extensive documentation supports all TMS320? DSP family generations of devices from productannouncement through applications development. The types of documentation available include: data sheets,such as this document, with design specifications; complete user’s reference guides for all devices and tools;technical briefs; development-support tools; on-line help; and hardware and software applications. Thefollowing is a brief, descriptive list of support documentation specific to the C6000? DSP devices:
The TMS320C6000 CPU and Instruction Set Reference Guide (literature number SPRU189) describes theC6000? DSP CPU (core) architecture, instruction set, pipeline, and associated interrupts.
The TMS320C6000 DSP Peripherals Overview Reference Guide (literature number SPRU190) provides anoverview and briefly describes the functionality of the peripherals available on the C6000? DSP platform ofdevices. This document also includes a table listing the peripherals available on the C6000 devices along withliterature numbers and hyperlinks to the associated peripheral documents.
The TMS320C64x Technical Overview (literature number SPRU395) gives an introduction to the C64x? digitalsignal processor, and discusses the application areas that are enhanced by the C64x? DSP VelociTI.2? VLIWarchitecture.
The TMS320C6414, TMS320C6415, and TMS320C6416 Digital Signal Processors Silicon Errata (literaturenumber SPRZ011) describes the known exceptions to the functional specifications for the TMS320C6414,TMS320C6415, and TMS320C6416 devices.
The TMS320C6414/15/16 Power Consumption Summary application report (literature number SPRA811)discusses the power consumption for user applications with the TMS320C6414, TMS320C6415, andTMS320C6416 DSP devices.
The Using IBIS Models for Timing Analysis application report (literature number SPRA839) describes how toproperly use IBIS models to attain accurate timing analysis for a given system.
The How To Begin Development Today With the TMS320C6414, TMS320C6415, and TMS320C6416 DSPsapplication report (literature number SPRA718) describes in more detail the compatibility andsimilarities/differences among the C6414, C6415, C6416, and C6211 devices.
The tools support documentation is electronically available within the Code Composer Studio? IntegratedDevelopment Environment (IDE). For a complete listing of C6000? DSP latest documentation, visit the TexasInstruments web site on the Worldwide Web at http://www.ti.com uniform resource locator (URL).
TMS320C6414, TMS320C6415, TMS320C6416FIXED-POINT DIGITAL SIGNAL PROCESSORS
SPRS146N ? FEBRUARY 2001 ? REVISED MAY 2005clock PLL (continued)
3.3 VC110 μFC20.1 μF/8PLLV/4CLKMODE0CLKMODE1Timer Internal ClockCLKOUT4,McBSP Internal ClockCLKOUT6CPU ClockEMIfilter/2Peripheral BusPLLMULTPLLx6, x12/6CLKINPLLCLK10000110ECLKIN_SEL (DEVCFG.[17,16]and DEVCFG.[15,14])/4/2ECLKINInternal to C64x(For the PLL Options, CLKMODE Pins Setup, andPLL Clock Frequency Ranges, see Table 31.)
EMIF000110EK2RATE(GBLCTL.[19,18])ECLKOUT1ECLKOUT2
NOTES:A.Place all PLL external components (C1, C2, and the EMI Filter) as close to the C6000? DSP device as possible. For the best
performance, TI recommends that all the PLL external components be on a single side of the board without jumpers, switches, orcomponents other than the ones shown.
B.For reduced PLL jitter, maximize the spacing between switching signals and the PLL external components (C1, C2, and the EMI
Filter).
C.The 3.3-V supply for the EMI filter must be from the same 3.3-V power plane supplying the I/O voltage, DVDD.
D.EMI filter manufacturer TDK part number ACF451832-333, -223, -153, -103. Panasonic part number EXCCET103U.
Figure 6. External PLL Circuitry for Either PLL Multiply Modes or x1 (Bypass) Mode
MEMORY存储芯片TMS320C6701GJC120中文规格书
