摘 要
本工程为重庆市某厂房车间，建筑面积为855.36m，共有3层。本设计采用的是钢筋混凝土框架结构，主要进行结构方案的布置以及中横向框架结构的设计计算，在设计计算时，首先计算各层荷载标准值和设计值；在进行恒载、活载、风荷载和地震荷载作用下的内力分析，并绘制内力图，也即是弯矩图、剪力图、轴力图；然后进行内力组合，找出最不利组合进行架梁柱的配筋计算；在进行框架梁、框架柱和基础配筋计算，并绘制施工图。
本设计依据设计规范及工业厂房的设计要求，体现了设计合理，结构简单，对称，受力均匀。综合考虑了安全、经济、适用的原则及使用功能、美观等的要求。整体稳定性好，立面处理较为简单，且充分考虑了抗震的要求，使之能有效地发挥其功能。
关键词： 框架，重力，荷载代表值，现浇，钢筋混凝土，结构，内力组合，弯矩条幅。
2
Abstract
This project, for the factory at wuhan in ChongQing province, the floor area is 855.36, there are three layers in all.
Design by reinforced concrete frame structure originally,last arrangement of schemes structural mainly and in calculate frame the designs of structures horizontal, while designing and calculating, calculate every layer and load standard value and designing value at first; The checking computations wind loads the side loaded with the earthquake under function to move;Carry on permanent year, live year, wind load with earthquake loading internal force under function analyze, try hard draw, curved square picture too, cut, try hard, axle try hard; Carry on internal force association, find out most unfavorable to make up, go on, set a roof beam in place to mix muscle calculate column;Carry on floor panel, roof boarding, stair, canopy, foundation mix muscle calculate, draw the construction drawing.
The design specification of factory of this design considerations and designing requirement of the factory, have reflected the design is rational, of simple structure, symmetrical, it is even to receive strength. Have considered safe, economic, applicable principle and the function of use, esthetic requirement synthetically. Whole stability is good, it is comparatively simple for elevation to deal with, and has fully considered the requirement of antidetonation, enable it to give play to its function effectively.
Key words： Frame structure ； Aseismatic design ；Match the muscle
to calculate
工业厂房设计中英文摘要
