华为Rip实验练习

ping 192.168.2.254

PING 192.168.2.254: 56 data bytes, press CTRL_C to break

Reply from 192.168.2.254: bytes=56 Sequence=1 ttl=254 time=60 ms Reply from 192.168.2.254: bytes=56 Sequence=2 ttl=254 time=40 ms Reply from 192.168.2.254: bytes=56 Sequence=3 ttl=254 time=40 ms Reply from 192.168.2.254: bytes=56 Sequence=4 ttl=254 time=40 ms Reply from 192.168.2.254: bytes=56 Sequence=5 ttl=254 time=30 ms

--- 192.168.2.254 ping statistics --- 5 packet(s) transmitted 5 packet(s) received 0.00% packet loss

round-trip min/avg/max = 30/42/60 ms

ping 192.168.2.1

PING 192.168.2.1: 56 data bytes, press CTRL_C to break Request time out

Reply from 192.168.2.1: bytes=56 Sequence=2 ttl=126 time=40 ms Reply from 192.168.2.1: bytes=56 Sequence=3 ttl=126 time=50 ms Reply from 192.168.2.1: bytes=56 Sequence=4 ttl=126 time=30 ms Reply from 192.168.2.1: bytes=56 Sequence=5 ttl=126 time=40 ms

--- 192.168.2.1 ping statistics --- 5 packet(s) transmitted 4 packet(s) received 20.00% packet loss

round-trip min/avg/max = 30/40/50 ms

clo clock d

clock datetime 11:05:00 2017-03-08 sy

system-view

Enter system view, return user view with Ctrl+Z. [Huawei] [Huawei]sy

[Huawei]sysname R2 [R2]su [R2]super p

[R2]super password c

[R2]super password cipher 123456 [R2] [R2]us [R2]user-i

[R2]user-interface v [R2]user-interface vty 0 4 [R2-ui-vty0-4]auth

[R2-ui-vty0-4]authentication-mode p

[R2-ui-vty0-4]authentication-mode password

Please configure the login password (maximum length 16):123456 [R2-ui-vty0-4]se

[R2-ui-vty0-4]set auth

[R2-ui-vty0-4]set authentication p

[R2-ui-vty0-4]set authentication password c

[R2-ui-vty0-4]set authentication password cipher 123456 [R2-ui-vty0-4]q [R2] [R2]us [R2]user-i

[R2]user-interface c

[R2]user-interface console 0 [R2-ui-console0]auth

[R2-ui-console0]authentication-mode p

[R2-ui-console0]authentication-mode password

Please configure the login password (maximum length 16):123456 [R2-ui-console0]se [R2-ui-console0]set auth

[R2-ui-console0]set authentication p

[R2-ui-console0]set authentication password c

[R2-ui-console0]set authentication password cipher 123456 [R2-ui-console0]q [R2] [R2]aaa

[R2-aaa]lo

[R2-aaa]local-user admin p

[R2-aaa]local-user admin password c

[R2-aaa]local-user admin password cipher admin1234 [R2-aaa] [R2-aaa]lo

[R2-aaa]local-user admin ser

[R2-aaa]local-user admin service-type tel [R2-aaa]local-user admin service-type telnet [R2-aaa] [R2-aaa]q [R2] [R2]int g

[R2]int GigabitEthernet 0/0/0

[R2-GigabitEthernet0/0/0]ip add 192.168.12.2 24 [R2-GigabitEthernet0/0/0]

Mar 8 2017 11:14:56-08:00 R2 %
IFNET/4/LINK_STATE(l)[0]:The line protocol IP on the interface GigabitEthernet0/0/0 has entered the UP state. [R2-GigabitEthernet0/0/0]un [R2-GigabitEthernet0/0/0]undo sh

[R2-GigabitEthernet0/0/0]undo shutdown

Info: Interface GigabitEthernet0/0/0 is not shutdown. [R2-GigabitEthernet0/0/0]q [R2]

[R2]int g0/0/1

[R2-GigabitEthernet0/0/1]ip add 192.168.23.1 24 [R2-GigabitEthernet0/0/1]

Mar 8 2017 11:17:05-08:00 R2 %
IFNET/4/LINK_STATE(l)[1]:The line protocol IP on the interface GigabitEthernet0/0/1 has entered the UP state. [R2-GigabitEthernet0/0/1]un [R2-GigabitEthernet0/0/1]undo sh

[R2-GigabitEthernet0/0/1]undo shutdown

Info: Interface GigabitEthernet0/0/1 is not shutdown. [R2-GigabitEthernet0/0/1]q [R2]

[R2]dis ip int br

*down: administratively down ^down: standby (l): loopback (s): spoofing

The number of interface that is UP in Physical is 3 The number of interface that is DOWN in Physical is 1 The number of interface that is UP in Protocol is 3 The number of interface that is DOWN in Protocol is 1

Interface IP Address/Mask Physical Protocol GigabitEthernet0/0/0 192.168.12.2/24 up up GigabitEthernet0/0/1 192.168.23.1/24 up up GigabitEthernet0/0/2 unassigned down down NULL0 unassigned up up(s)

[R2] [R2] [R2] [R2]q save

The current configuration will be written to the device. Are you sure to continue? (y/n)[n]:y

It will take several minutes to save configuration file, please wait..........

Configuration file had been saved successfully

Note: The configuration file will take effect after being activated

Please check whether system data has been changed, and save data in time

Configuration console time out, please press any key to log on

Password: Password: sy

system-view

Enter system view, return user view with Ctrl+Z. [R2] [R2] [R2]rip

[R2-rip-1]ver

[R2-rip-1]verify-source [R2-rip-1]ver

[R2-rip-1]version 2 [R2-rip-1]un

[R2-rip-1]undo sum [R2-rip-1]undo summary [R2-rip-1] [R2-rip-1]net

[R2-rip-1]network 192.168.12.0 [R2-rip-1] [R2-rip-1]net

[R2-rip-1]network 192.168.23.0 [R2-rip-1] [R2-rip-1]q [R2] [R2]dis

[R2]display ip rou

[R2]display ip routing-table

Route Flags: R - relay, D - download to fib

------------------------------------------------------------------------------ Routing Tables: Public

Destinations : 11 Routes : 11

Destination/Mask Proto Pre Cost Flags NextHop Interface

127.0.0.0/8 Direct 0 0 D 127.0.0.1 InLoopBack0

127.0.0.1/32 Direct 0 0 D 127.0.0.1 InLoopBack0

127.255.255.255/32 Direct 0 0 D 127.0.0.1 InLoopBack0

192.168.1.0/24 RIP 100 1 D 192.168.12.1 GigabitEthernet 0/0/0

192.168.12.0/24 Direct 0 0 D 192.168.12.2 GigabitEthernet 0/0/0

192.168.12.2/32 Direct 0 0 D 127.0.0.1 GigabitEthernet 0/0/0

192.168.12.255/32 Direct 0 0 D 127.0.0.1 GigabitEthernet 0/0/0

192.168.23.0/24 Direct 0 0 D 192.168.23.1 GigabitEthernet 0/0/1

192.168.23.1/32 Direct 0 0 D 127.0.0.1 GigabitEthernet 0/0/1

192.168.23.255/32 Direct 0 0 D 127.0.0.1 GigabitEthernet 0/0/1

255.255.255.255/32 Direct 0 0 D 127.0.0.1 InLoopBack0

[R2]q save

The current configuration will be written to the device. Are you sure to continue? (y/n)[n]:y

It will take several minutes to save configuration file, please wait.........